[소재]
펜더:FRP
스테이:스틸
[치수]
스태빌라이저 좌우 폭:약 188mm
높이:약 138mm
전후 폭:약 165mm
파이프 지름:φ 15.9mm
펜더 폭:약 104mm
펜더 바깥 둘레 길이:약 410mm
[세트 내용]
펜더 X1
지지대 X1식
파이프 워크 스태빌라이저 X1
*FIRESTONE타이어는 4.00사이즈의 병용 가능을 확인하고 있습니다.
*타이어의 종류나 사이즈가 너무 큰 경우, 장착할 수 없는 경우도 있습니다.
[FRP·검정 겔 코트에 대해서]
*FRP는 원래 검은 색입니다만, 이것은 도장의 검은 색이 아니다 " 예쁜 흑색" 에서는 있지 않습니다. 그대로 사용도 가능하나, 연도별에 의한 변색, 퇴색이 나오고 올테니 도장되는 것을 권고 드립니다.
*FRP제품은 제조 공정상의 모 형틀 때 등에 피할 수 없는 또, 그런 상처가 생깁니다. 또, 약간의 복고에 대해서도 "FRP제품의 허용 범위 내" 로 하겠습니다. 어디까지나 도장의 기초로서 이해 주세요.
*FRP제품은, 억지로 힘을 가하면 균열 등의 증상이 나올 경우가 있습니다.
size
Stabilizer Left / Right Width: 188 approx. mm Height: Approx. 138mm, front/rear width: Approx. 165mm Pipe diameter: Φ15.9mm Fender widthApprox. 104mm Fender circumference length: Approx. 410mm
materials
Fender: FRP Bracket: Steel
Components
Fender x 1 Bracket x 1 set Pipework stabilizer x 1
*The stabilizer has a front and rear orientation.The taller side should be on the front.
*FIRESTONE tires are confirmed to be available in 4.00 size.
*If the tire type or size is too large, it may not be able to be mounted.
About FRP and black gel coat
*FRP is originally black, but this is not painted black and not beautiful black.It can be use as it is, but it is recommended to paint it because of the discoloration and fading over time.
*Scratches and scratches are unavoidable in FRP products during the die-cutting process.Also, some color fading is to be within the acceptable range of FRP products.Please understand that it is only a base for painting.
*FRP products may crack if excessive force is applied to them.
*There may be changes in product specifications due to the manufacturer's reasons.