- 공구
- 오토바이 전문 공구
- 체인 커터
- MINIMOTO
- MINIMOTO - 체인 커터
- 상품 목록
- 체인 커터 #420,428,520,525,530
체인 커터 #420,428,520,525,530
Product # 4811
16,065.77 KRW (1,804 엔)
List price: 16,065.77 KRW Save 0%
+18 Webike point (160.3 KRW)
Product # 4811
16,065.77 KRW (1,804 엔)
List price: 16,065.77 KRW Save 0%
+18 Webike point (160.3 KRW)
It is not a high-end product, so this is sufficient unless you use it to do everything.
If you can't seem to get the Pin out when you pull it out.
You can use it after shaving it with a grinder and it is up to you to devise a way to use it.
It is useful if you have it.View Detail
There was a set of Body and a substitute Pick.
First turn turn Screw before Chain cut and you see that Pick is bent.
Since I can not use it, I tried doing it with Cut, but it caught on pulling out and broke.
When I exchanged for a replacement Pick and turned Screw, it was not bent more than the first one.
Chain cut and tried to pull out again.
It is durable due to poor precision.
If so high things are better.View Detail
It is typical of bad mood.
Whatever versatility is not to choose Size
Part accuracy is too bad and there is no durability.
didNon-seal (The cheapest one)
I used it to cut 525 Size.
The core is slightly bent from the beginning, it is difficult to capture the center
Furthermore, when extruding Pin, the tool side loses
The core cracked vertically, it got broken.
Although it responded with the attached spare parts,
Although it endured work,
I crooked again and I can not use it anymore.
It's almost disposable.
There is no complaint because the price is price ,,,
Conversely I was impressed with the durability of Did.
Parts pushing out the core (?) As
Small Sana Bearing has 1 pcs..
It is a part not included in Instruction Manual,
When exchanging the core, if you disassemble it inadvertently
Be careful as it will definitely lose it.
I do not know what will happen if it's gone.View Detail
I bought it by changing my own Chain.
The texture is not good but there was no problem with the motion.
Moreover, it can be used not only to remove Pin but also for press-fitting Plate after changing Chain
So that is a good tool for that point.View Detail
I've been Cut in Grinder so far but it takes time and it is troublesome so I bought it with Chain this time. The Chain Tool that I was planning to purchase was out of stock so I made it the cheapest kore. When opening for the first time I saw it was somewhat uneasy because I was not able to see things that seemed to be of good quality in flattery even though I was worth seeing at the first time. But Chain's Cut was okay as it made it without problems.
However, is the accuracy of the core pushing out Pin poor? It is Large strange to remove from Chain after Cut. I knew that it would be okay if I used it only once a year because it was missing if it was lightly touched with a slotted screwdriver.
If you do not use it frequently in business etc. I think that it is Recommendation.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.