*본 제품은 차량 검사 대응이지만, 광축 조정 불량, 노후화에 따른 전조등 렌즈 면의 때나 흐리다, 등 체내 리플렉터의 페인트 벗겨진다, 정품 이외의 사외 전조등 장치에 장착된 경우 등은 차량 검사시의 전조등 검사 때에 불합격으로 판정될 경우가 있으므로 미리 양해 바랍니다.
Type: PH7 Rated Voltage: 12v AC-DC dual use Power consumption: 30W (Hi beam) / 20W (Lo beam) Color Temperature: 6000K 2 Lights Kit
12V오토바이용 LED헤드 라이트 밸브 키트
■ LED에서 발생하는 열을 효율적으로 놓치는 것에서 항상 풀 파워로 점등 할 수 있다! LED는 변환 효율 (입력 전력을 가시 광선[사람의 눈으로 볼 수 있는 파장의 전자파]로 변환하는 효율) 하지만 매우 좋다는 특징이 있지만, 그래도 입력 전력을 100%라고 할 때, 70%이상은 열에 변환되어 버립니다. 사이클론 LED시리즈는 "가장 굵은 것 알루미늄 원목" "히트 싱크" "방수 냉각팬" 라는 3개의 조합에 의한, 효율적으로 열을 놓치고 항상 풀 파워 점등을 가능하게 했습니다! 열에 약하다 LED에게 열 대책은 필수입니다. 만약 이 열을 효율적으로 놓치지 못하면 점등 초반부터 파워를 떨어뜨릴지, 도중부터 파워를 낮추는 원숭이를 수 없습니다. 즉 열 대책이 확실히 되어 있지 않으면 LED가 갖는 잠재력을 최대한 이끌어 내지 못한 것입니다.
■ 내구성이 높은 방수 팬 채용! 사이클론 LED시리즈에서는, 하이 파워 LED에서 발생하는 열을 효율적으로 냉각하기 위해서 중요한 역할을 하는 팬들에게도 매달렸습니다. 일반적인 전자 기기에 이용되고 있는 팬들은 회전 부분의 베어링이 "메탈 지지형" 그래서 내구성이 낮고 오토바이에는 맞지 않아요. 사이클론 LED시리즈에서는, 라디에이터의 냉각 팬들에도 채용되고 있는 방수 성능, 뛰어난 내구성을 갖춘 "두축 볼 베어링 타입" 의 축받이를 채용하고 있습니다. 겉보기는 작지만 20G의 2시간 내진 시험에도 합격!오토바이용 LED밸브에서 방수&고 내구성 팬들을 채용하고 있는 것은 프로 텍 뿐입니다.
■ 안심의 차량 검사 대응품! 최고 광도는 차량 검사 통과 기준치인 15000캉데라을 쉽게 해결하고 있습니다. 첨부의 일본 차량 검사 협회 발행의 성적서에 최고 밝기가 기재되어 있습니다.
■ 긴 수명. 노멀의 할로겐 밸브는 물론, H.I.D. 더 더욱 긴 수명입니다.
■ 전력 절약 설계! 소비 전력은 H4/H4-R타입이 30W, H7타입이 20W므로, 일반적인 H4할로겐 밸브 (12v 55/60w) 보다 저전력입니다.
■ Hi/Lo전환! H4/H4-R타입은 Hi빔, Lo빔에 각각 3개의 LED를 배치하고 Hi/Lo전환이 가능합니다.
■ 장착 간단하다! 밸브 커플러 교환에서 배선이 간단합니다.
■ 갑자기 밝은 재빨리 점등! HID와 다른 전원 투입 직후부터 풀 파워 점등합니다. 또 HID처럼 서서히 발광 색이 변화하는 것이 없습니다.
LED Headlight Bulb Kit for 12V Motorcycles
■By efficiently releasing the heat generated by the LED, the LED can always be lit at full power! LEDs are characterized by their extremely high conversion efficiency (the efficiency of converting input power into visible light [electromagnetic waves with wavelengths that can be seen by the human eye]), but even so, if the input power is 100%, more than 70% is converted into heat.The Cyclone LED series uses a combination of solid aluminum, a heat sink, and a waterproof cooling fan to efficiently dissipate heat and enable full power lighting at all times. Thermal management is essential for heat-sensitive LEDs.If this heat cannot be dissipated efficiently, the power must be reduced from the start of lighting or from the middle of lighting.In other words, if you don't have a good thermal management system, you can't get the full potential of LED.
■Adopts a highly durable waterproof fan! In the Cyclone LED series, Protec also paid attention to the fan which plays an important role in cooling the heat generated by the high power LED efficiently.The fan used for general electronic equipment is not suitable for motorcycles because the bearing of the rotating part is "metal support type" and durability is low.The Cyclone LED series uses a "dual axis ball bearing type" bearing with waterproof performance and excellent durability, which is also used for cooling fans of radiators.It may look small, but it has passed the 20G seismic test for 2 hours!Protech is the only LED bulb for motorcycles that uses a waterproof and durable fan.
■Long life! It has a longer life than H.I.D.
■Power-saving design! Power consumption is 30W for H4 / H4-R type and 20W for H7 type, so it is more energy saving than general H4 halogen bulb (12V 55 / 60W).
■Adoption of reliable CREE LED! Durable and reliable CREE XLamp XP-L LEDs are used for the light emitter.
■Hi / Lo switching! H4 / H4-R type has 3 LEDs for Hi beam and Lo beam respectively and Hi / Lo switching is available.
■Easy to install! It is easy to wire by replacing the valve coupler.
■Bright and quick lighting! Unlike HID, it lights up with full power immediately after power-on.Also, the color of the light does not change gradually like HID.