[재료] 엑저스트 파이프 재질:티탄
[사양] 집합 방식:4in1
[치수]
·엑저스트 파이프 지름:Φ 38
테일 파이프 바깥:Φ 60.5
·소음기 길이:365mm
[세트 내용]
·엑저스트 파이프 1대분
집합부
테일 파이프
스프링 8개
·소음기
엔드 격막
·소음기 밴드
·소음기 스테이
[관리 데이터]
·도렌 보루토:○
오일 필터 교환:집합부 탈착 요점
센터 스탠드:X
*2000년 이후 생산된 차량에서, 머플러 내에 촉매 장치 등을 장비하고 있는 모델에는 대응하고 있지 않습니다. 머플러 교환 후 도로 주행은 불법이 되므로 주의하세요.
*NITRO RACING탠덤 스텝 브래킷 KIT Type 1은 설치 불가합니다. 이미 Type 1을 사용의 경우는 탠덤 스텝 브래킷 KIT Type 2로의 교환을 하세요.
*NITRORACING소음기에 장비되고 있는 소음용 격막은 결코 떼지 마세요. 또 소음기 내부 소음 털실은, 정기적으로 점검하는 오바 홀을 하는 것을 추천 드립니다.
*윙카의 종류에 따라서는 소음기와 간섭이 생각됩니다. 그 경우는 방향 지시등 교환이 필요합니다.
*끝 감세 벽은 출하시에 소음기에 장착되어 있습니다.
*코니 컬 티타늄 사일런서 V-1/V-2/V-3에는 스테이가 장착되어 있으므로 소음기 밴드는 부속하지 않습니다.
*사일런서 스테이는 OHLINS R쇼크의 리자 바탄쿠가 설치 가능한 구조로 되어 있습니다.
*싱글 타입의 백 스텝 등에 변경 또는 정상 단계의 탠덤부의 절단 가공이 필요합니다.
*장착 시는 노멀 플랜지를 사용하십시오. KIT에는 포함되어 있지 않습니다.
*화상 1은 상품의 이미지가 됩니다. 선택 사항이 고르는 소음기 형상은, 화상 2에서 확인하십시요.
[Material]
・Silencer: Titanium
・Exhaust pipe: Titanium
[Specification]
・UP type
・Assembly method: 4in1
・Tail pipe outer diameter: Φ60.5
・Exhaust pipe diameter: Φ38
・EX pipe, silencer surface finish: Heat polish
[Components]
・Assembly part
・Tail pipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
・Exhaust pipe per vehicle
[Maintenance Data]
・Drain bolt: Available
・Center stand: Not available
・Change oil filter: Manifold section needs to be detached
Please enjoy riding on public roads with peace of mind.
*Conditions will vary depending on the year of the bike and other factors.
*The end baffle is pre-installed on the silencer at the time of shipment.
*For installation, use a stock flange.It is not included in the KIT.
*Grenade titanium silencers are mounted with a Φ90 diameter silencer band.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*It is necessary to change to a single type rearset or cut off the pillion part of the stock step.
*Some types of blinkers may interfere with silencers.In this case, you will need to replace the blinkers.
*NEVER remove the silencing baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
*This product is not compatible with the vehicles produced after 2000, which are equipped with a catalytic converter in the exhaust.
*The short tail type silencer bracket is designed to fit the reservoir tank of OHLINS R shock.
*NITRO RACING Pillion Step Bracket KIT Type 1 cannot be installed on the short tail type.If you are already using Type 1, please replace it with the Pillion Step Bracket KIT Type 2.
*Image 1 is for reference only.Please refer to the image 2 for the silencer shape you can choose.