에스토레야용 리어 캐리어, 리어 박스, 설치에 필요한 대좌·나사류가 달린 풀 세트입니다.
또한 세트 판매만 한정 특전 리어 박스 이너를 부속합니다.
캡 인젝션 어느 에스토레야에도 장착할 수 있는 리어 캐리어 수 있었습니다
에스토레야은 1992년에 등장한 포인트를 개선하며, 배기 가스 규제 등에도 대응하는 현재도 카탈로그에 라인 업되고 있는 카와사키의 대표적 클래식 자전거입니다. 기본적인 차체 설계는 변하지 않지만 연식에 의해서 세부 사항이 변경되고 있으므로 애프터 파츠를 구입할 때는 주의가 필요합니다.
리어 경력도 그 하나입니다. 카와사키 순정의 인젝션 차량용 리어 커리어는 택시 사양에는 장착할 수 없습니다.
그러나 신구 에스토레야의 차체를 모두 준비한 곳 어디에도 장착할 수 있는 리어 경력을 설계했습니다.
에스토레야의 택시 사양과 인젝션 사양 차량은 세부 사항이 다르지만, 어느 쪽의 차량에 장착해도 안전의 여닫기 등에 간섭하는 일이 없도록 설계했습니다. 또 에스토레야은 연식과 버전으로 도금을 기조로 한 디자인과 블랙을 기조로 한 디자인이 있지만 눈에 띄지 않게 가는 환봉에서 설계하는 검은 색 도장으로 끝냈지요.
다리 부분은 10mm, 천판의 부분에는 9mm로 길쭉한 금속 막대기를 채용하고있습니다만, 정신과 진동에 강한 보강을 넣은 설계를 도입하고 있으므로 단기통 독특한 진동에도 제대로 견딜 수 있습니다.
디자인도 중시!천판 부분이 시트의 라인에 따르도록 설계
시트와 리어 캐리어의 클리어런스를 제대로 확보하는 것은 물론이지만, 단순히 확대하는 것이 아니라 안전 라인을 따라서 피하기로 리어 캐리어 장착시의 폼을 소중히 했습니다.
월드 워크의 리어 캐리어와의 궁합도 뛰어납니다
짐을 싣다뿐 아니라 리어 박스를 장착하는 것도 상정하고 설계하고 있기 때문에 일반적인 리어 박스의 범용 베이스는 문제 없는 장착 가능합니다. 물론 월드 워크의 리어 박스와 궁합도 뛰어납니다.
기밀 하중은 5kg이므로 40리터 급 리어 박스의 장착도 가능합니다.
에스트 레어의 이미지를 깨지 않도록 마른 환봉을 소재로 채택하기로 투박하면서 마른 차체에 어울리는 디자인했습니다.
This is a full set of Estrella rear carrier, rear box, base and screws for installation.
In addition, the set comes with a limited edition rear box inner.
World Wolk has created a rear carrier that can be installed on both carbureted and injected ESTRELLA
Introduced in 1992, ESTRELLA is one of KAWASAKI's most popular classic bikes.The basic design of the vehicle has not changed, but the details have been changed depending on the year, so be careful when purchasing aftermarket parts.
The rear rack is one of them.KAWASAKI stock rear carriers for injected vehicles cannot be fitted to carbureted models.
However, with both the new and old ESTRELLA chassis, World Walk was able to design a rear rack that would fit both.
Although the details of ESTRELLA's carbureted and injected models are different, World Walk has designed this product so that it will not interfere with the opening and closing of the seat when installed on either model.Depending on the year and version of the ESTRELLA, there is a chrome based design or a black based design, but World Walk designed the ESTRELLA with thin round bars and finished it with black paint.
The legs are made of 10mm and the top plate is made of 9mm thin metal rods, but the design is reinforced to withstand the vibrations of a single cylinder.
Design is also important!Designed so that the top panel part follows the line of the seat
In addition to securing the clearance between the seat and the rear carrier, World Walk has tried to keep the form of the rear carrier by following the line of the seat rather than simply widening it.
Compatible with World Walk rear carriers
It is designed not only to carry luggage but also to fit a rear box, so a universal base for a rear box can be installed without any problem.Of course, it also goes great with the World Walk rear box.
The load capacity is 5kg, so it is possible to install a 40L rear box.
To keep the image of ESTRELLA intact, World Walk used a slender round bar as the material to create a design that is rugged yet fits the slim body.