● U-KANAYA제품은 전 GP라이더의 가나야 히데오 씨와 내 상사의 제휴에 의한 상품입니다. U-KANAYA사의 관리 하에서 정밀 가공하고 있습니다.
● U-KANAYA의 전 제품은, 일본 국내에서 전문 직원이 제품의 조립 및 검사를 하고 있으므로, 안심해서 사용하실 수 있습니다.
[가도식 R타입 레버의 특징]
● 불읜 전도된 때에 레버에 힘이 가해지면 카미 방향으로 레버가 달아났다, 절손을 방지하는 가도 기구를 채용하고 있습니다.
● 레버 상단에 고속 주행시 공기 저항을 저감하기 위한 구멍 가공 (틈새) 를 추가.
● 어드저스트 기구 쯔마미 디자인을 변경하고, 기존 제품에 비해조작성이 개선되고 있습니다.
● 레버 끝 모양의 최적화에 의한 바 엔드에 접촉을 극도로 억제하다 구조에 완성하고 있습니다.
[상품 설명]
● 높은 강도로 내식성이 뛰어난 6061의 알루미늄 재료를 머시닝 가공 후, 경질 알루마이트 처리를 하고 고급스런 완성품입니다.
● 정밀한 풀 머시닝 가공에 의한 고급스러운 마무리가 되고 있습니다.
● 레버 7색 X어저스터 8색, 합계 56종류의 칼라 바리 에이션으로 애차의 커스텀 코디에 한몫 합니다.
● 진정한 레버와 교체하는 것만으로 간단히 장착 가능합니다. 차량에 따라서는 순정 부품을 유용합니다.
● 순정 레버와 비교해서 레버 위치가 앞에 와서 힘을 걸기 쉬운 형상이 됩니다. 손의 작은 편이나 순정 레버를 멀리 느끼고 있는 것에 특별히 권합니다.
● 찰칵 한 클릭감 좋은 원터치 어저스터에 의한 레버 위치를 인근에서 멀리까지 6단계에서 조정 가능. 레버 첨단 부분에서 약 30mm의 조정 폭이 있습니다.
● 레버의 길이는 약 175mm입니다. *아탓치멩토부는 포함하지 않아.
● U-KANAYA사의 독자적인 관리 시스템을 도입하고 있기 때문에, 만일의 사고에 의한 파손 부품의 부품 공급으로 신속히 대응 가능합니다.
● 보수 부품도 세세하게 설정되어 있으므로, 파손 부품 공급도 원활합니다.
●U-KANAYA products are made in collaboration with Hideo Kanaya, a former GP rider, and Uchi Shokai.It is precision processed under the control of U-KANAYA.
●All products of U-KANAYA are assembled and inspected by our professional staff in Japan, so you can use them with confidence.
[Features of the foldable R-type lever]
●In the event of an accidental fall, the lever escapes upward to prevent breakage when force is applied to it.
●A hole (slit) has been added to the end of the lever to reduce air resistance at high speeds.
●The knob design of the adjustment mechanism has been changed to improve operability compared to conventional products.
●The lever end shape has been optimized to minimize contact with the bar end.
[Product Description]
●6061 aluminum material, which has high strength and excellent corrosion resistance, is machined and hard-anodized for a high-grade finish.
●The high-precision full-machining process gives the product a high-grade finish.
●With 7 colors of levers and 8 colors of adjusters, there are a total of 56 color variations to help you customize your bike.
●It can be easily installed by simply replacing the stock lever.Depending on the model, stock parts may be used.
●The lever is positioned closer to the front than the stock lever, making it easier to apply force.It is especially recommended for those with small hands or those who feel the stock lever is too far away.
●The lever position can be adjusted in 6 ways from near to far by the one-touch adjuster with a good click feeling.There is an adjustment range of about 30mm at the end of the lever.
●The length of the lever is about 175mm. *Attachment part is not included.
●U-KANAYA's original management system allows us to respond quickly to the supply of parts damaged by accidents.
●The repair parts are also set in detail, so the supply of damaged parts is smooth.