구차을 현대의 거리에서 안전하게 사용하기 위해서는 필수, 고성능인 전자식 신호 릴레이
신뢰성 높은 일본산이지요.
본체는 콤팩트하고 탬파 마운트에서, 정품 같이 차체에 장착이 가능하게 되어 있습니다.
12V전원의 차량이 있으면, 타메이커 차량에서도 사용 가능합니다.
[전자식 때문에 하이 응답과 성능]
기계식 신호 봉송은 구조상 아무래도 윙커 조작에서 점등까지 한 박자 늦추어 납니다만, 전자식 계전기는 조작한 순간부터 늦는 일 없이 확실히 점등을 시작합니다.
교통량이 많은 현대의 스트리트에선 이 하이 리스폰스성이 라이더의 안전을 확보합니다.
또, 노후화 및 전압 변화로 점멸 간격에 영향을 받지 않습니다.
정차도 주행 중에도 항상 안정된 점멸 횟수입니다.
[윙커 구슬 조각의 경고 기능]
혹시 윙커 밸브가 구슬 조각을 일으킨 경우, 점멸 횟수를 통상의 두배 간격으로 하이 자동 점멸 장치화하기로 라이더에게 주의를 재촉합니다.
[대용량]
윙커 밸브 네 등의 동시 점멸이 가능한 용량이 있으므로, 신호, 해저드 릴레이의 공용화가 가능합니다.
(PAMS LABO핸들 왼쪽 스위치 세팅에 환장한 경우, 이쪽의 신호 봉송을 권장합니다)
[MADE IN JAPAN의 내구성]
국내 4대 오토바이 제조 업체는 물론, 국산 승용차에도 전장 부품을 공급하는 업체 제품입니다.
이 때문에 해외제와 달리, 10년 기준의 내구성이 확보되어 있습니다.
High performance electronic blinker relays are essential for the safe use of old vehicles on modern streets.
Made in Japan with high reliability.
The body is compact and damper-mounted, so it can be installed on the vehicle body just like the stock one.
This product can be used with other manufacturers' vehicles as long as they have a 12V power supply.
[High response and performance thanks to the electronic system]
Due to the structure of mechanical indicator relays, there is a delay between the operation of the indicator and the lighting of the indicator, but electronic relays start lighting without delay from the moment of operation.
In today's busy streets, this high responsiveness ensures rider safety.
In addition, the blinking interval is not affected by aging or voltage change.
The number of flashes is always stable whether the vehicle is stopped or in motion.
[Blinker ball loss warning function]
In the event that the indicator bulb runs out of power, the system will alert the rider by doubling the number of flashes to the normal high flasher interval.
[high volume]
Since it has the capacity to flash four indicator bulbs simultaneously, it is possible to share the indicator and hazard relays.
(The manufacturer recommends this blinker relay when replacing with the PAMS LABO Handle Left Switch Set)
[MADE IN JAPAN durability]
This product is made by a manufacturer that supplies electrical components not only to the four major motorcycle manufacturers in Japan but also to made-in-Japan passenger vehicles.
Therefore, the durability of 10 years is ensured, unlike non Japanese products.