적합 기종:iPhone7Plus
패키지 사이즈:125X190X23mm
본체 크기:82X163X10mm
중량:48g
[형식 번호]
·쿠마 몬 모델:GKL-280KMA
바이크 모델:GKL-280BIK
*본 제품은 iPhone7Plus전용 설계입니다.
*본 제품은 상품의 특성상 알루미늄제 때문에, 전파가 본체 뒤쪽을 가로막게 됩니다. 근소하게 전파를 수신하는 성능이 떨어지는 가능성이 있습니다.
*본 제품은, iPhone을 완전히 충격 등으로부터 보호할 목적에서 조성되어 있지 않습니다. iPhone본체에 파손, 고장, 분실, 데이터의 소실 등에 대해서 폐사는 일절 책임 질 수 없으니 미리 양해 바랍니다.
*본 제품은, 충격 흡수용 수지로 iPhone과 케이스가 접하지 않도록 설계하고 있지만, iPhone을 완전히 상처에서 막는 목적이 만들어지지 않아요.
*본 제품 장착에 의해iPhone본체에 대한 상처에 대해서 길드 디자인은 모두 책임을 질 수 없으니 미리 양해 바랍니다.
*제품의 사양·외관·동봉품에 대해서는 예고 없이 변경될 수 있습니다.
*사외 충전기, 이어폰 (이어폰 잭 부분의 지름은 8.5mm입니다) 등은 사용하지 못할 가능성이 있습니다.
*사외 필름은 종류에 따라서는 필름의 부표 등 불편이 생길 수 있으므로 양해 바랍니다.
원래 전파 상황이 좋지 않은 장소에서는, 전파가 수신할 경우가 있습니다. 통상의 전파를 수신하고 있는 경우는 문제 없습니다.
*알루마이트 처리의 특성상별 로또 같은 색으로는 것이 어려워집니다. 되도록 같은 색감으로 마치도록 노력하고 있지만, 양은 처리, 로또에 따른 색상 편차가 납니다.
*본 제품은 양은 처리를 하고 있기 때문에, 전류를 통해접점이라고 불리는 장소는 색이 되지 않습니다. 경우 안쪽에 2점 빛이 되지 않은 부분이 있지만 가공 불량이 없습니다.
*제품 사진은 최대한 실제 색에 접근하도록 노력하고있습니다만, 손님이 사용하는 컴퓨터의 모니터, 컬러 설정·실내 조명, 햇빛 등에 따른 색상의 변화가 느껴지는 경우가 있습니다.
Compatible models: IPhone7Plus
Package Size: 125 x 190 x 23mm
Main unit size: 82 x 163 x 10mm
Weight: 48g
[model number]
・Kumamon model: GKL-280KMA
・Bike model: GKL-280BIK
*This product is specially designed for iPhone7Plus.
*Because this product is made of aluminum, radio waves will be blocked from the back of the main body.There is a possibility that the performance of receiving radio waves is slightly inferior.
*This product is not designed to completely protect your iPhone from shocks.We are not responsible for any damage to the iPhone, failure, loss, or loss of data.
*This product is designed to prevent the iPhone from contacting with the case by using shock-absorbing resin, but it is not designed to completely protect the iPhone from scratches.
*GILD Design is not responsible for any damage to the iPhone caused by installing this product.
*The specifications, appearance, and included products of the product are subject to change without notice.
*You may not be able to use aftermarket chargers or earphones (earphone jack is 8.5mm in diameter).
*Some types of aftermarket film may cause problems such as lifting of the film.
*It may be difficult to receive the signal in the place where the signal condition is not good.If you are receiving a normal signal, there is no problem.
*Due to the characteristics of the anodizing process, it is difficult to finish the same color for each lot.We try to keep the same color as much as possible, but due to the anodizing process, the color may vary from lot to lot.
*Because this product is anodized, the contact point where the electric current passes through is not colored.There are two points on the inside of the case that are not colored, but it is not a defect in processing.
*Although we have made every effort to make the product photos as close as possible to the actual color of the product, you may notice a change in color depending on your computer monitor, color settings, indoor lighting, sunlight, and other factors.