- 헬멧
- 헬멧 로크
- KIJIMA
- KIJIMA - 헬멧 로크
- 상품 목록
- 헬멧 로크
헬멧 로크
Product # HTR-05006
37,453.75 KRW (4,200 엔)
List price: 41,020.78 KRW Save 9%
+42 Webike point (374.53 KRW)
Product # HTR-05006
37,453.75 KRW (4,200 엔)
List price: 41,020.78 KRW Save 9%
+42 Webike point (374.53 KRW)
Model Page Links
Fits: TRIUMPH SCRAMBLER 17-, TRIUMPH BONNEVILLE T100 16-, TRIUMPH StreetTwin 16-
If something that is normally taken for granted is not included, we want it, as a matter of course.
It is the fulfillment of that desire.
The large size can be installed as long as it fits at the round Pipe.
Even if the Large size does not fit, it can be managed with Small processing.
The feel is OEM-like and convenient.View Detail
Fits: TRIUMPH SCRAMBLER 17-, TRIUMPH BONNEVILLE T100 16-, TRIUMPH StreetTwin 16-
Compatible car models at the time of purchase include 16-" I bought it to put on my '16 Flat truckPRO because it was listed as a SCRAMBLER for the '16 Flat truck.
When I looked at the Instruction Manual, I found that there was something wrong. 17y-SCRAMBLER It was written.
Too bad, this is what you get when you buy on the Net.View Detail
Fits: TRIUMPH SCRAMBLER 17-, TRIUMPH BONNEVILLE T100 16-, TRIUMPH StreetTwin 16-
There is another product for BONNEVILLET120, but my T120 doesn't have Grab Bar and its Rail to which the product is attached, so I bought this one for T100 which is fixed to Seat frame. I was able to install it without any problem.
You only need one Phillips Screwdriver to install it. It is fixed by tightening the bracket and the gold plate of the Helmet lock side with the screw, but the distance between the screw holes is quite far to make the tightening after installation strong, so it was a little tricky.
If the screw is hooked on the bracket side nut, you can turn the screw, but it takes a lot of force to shorten the distance to the angle that the screw goes through the nut. But it takes a lot of power to shorten the distance to the angle where the screw goes through the nut.
Once installed, it is easy to loosen and adjust the angle of the helmet lock. Image after installation is as shown in the product photo, is not noticeable, does not destroy the style. In terms of convenience, there is a difference between having it and not having it, and it is helpful not to be troubled with the placement of the Helmet in the touring destination.View Detail
Fits: TRIUMPH SCRAMBLER 17-, TRIUMPH BONNEVILLE T100 16-, TRIUMPH StreetTwin 16-
I bought it to install the side bag when I go to Hokkaido touring It is easy to install and it takes about 15 minutes for both sides
Side bags are The Tanax Moto fizz MFK-135 I've been using it for a while now and it has served me well without any problems
and KIJIMA Helmet lock HTR-05006 But if you add Support, you can use Helmet lock as it is It's gone So, it is a little Parenthesis bad, Helmet lock as shown in the picture It is mounted at an angle pointing upwardsView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.