4파업 시리즈 III소음기 업 스타일
Product # RSV1101
420,454.04 KRW (47,149 엔)
List price: 420,454.04 KRW Save 0%
+471 Webike point (4,200.17 KRW)
제조 업체 재고가있는 경우, |
Ships around 3rd Apr. 2024? |
다음 배송 날짜는 Webike에 문의해 주세요 |
Product # RSV1101
420,454.04 KRW (47,149 엔)
List price: 420,454.04 KRW Save 0%
+471 Webike point (4,200.17 KRW)
제조 업체 재고가있는 경우, |
Ships around 3rd Apr. 2024? |
다음 배송 날짜는 Webike에 문의해 주세요 |
Model Page Links
The texture and sound became the sound that I liked that a little bass worked.
Since the previous OEMExhaust System was rusted and the exhaust leaked, it replaced it. So the sound's LargeSmall is unknown.
We also exchange Manifold, but we needed a little adjustment at the joint.
View Detail
Hey all!I have a 4 Stroke RSV Silencer Series III on my Honda XLR Baja. It works great and I really like the sound it makes! It came without the mid gasket (picture). I had to improvise, but I am still not satisfied. Where can I buy the original mid gasket for the RSV Silencer Series III ?Thanks! View Detail
Fits: KAWASAKI D-TRACKER -00, KAWASAKI KLX250 ES -00, KAWASAKI KLX250 SR , KAWASAKI KLX250
[How is it used?
We introduced it for its light weight and moderate exhaust sound. Usually I use it with Baffle equipment as a Large person.
The motorcycle is a 1999 pre-regulation D Tracker.
Was the one you received as per Image?
Excellent workmanship. The highest price I have ever paid for an Other Brand Product installed on a D Tracker. w
Was the installation difficult?
It was not a simple matter. The bracket of the middle pipe did not match the screw holes on the frame side, so we had to use a disk sander to cut a slit in the bracket to match the screw holes. The middle pipe was interfering with a part of the air cleaner box, and the box would melt due to heat if it was left as it was. The Silencer is a 2.5mm thick pipe that is used to prevent the exhaust from interfering with the License Plate. The unit was mounted with a 0mm collar in between, offset on the outside of the body. Since the OEMSilencer is part of the strength structure of the Seat rail, if the Silencer is changed to Other Brand Product, it is necessary to put in reinforcement instead, so the Seat Rail Reinforcement Plate made by K&T (item no. (180215) was installed. I was also puzzled why Inch size Nut 7/16 was used for the connection between the middle Pipe and the Silencer. I had an Inch size Wrench set, so it was Large sturdy.
How was your experience with it?
I tried starting the Engine without Baffle...
That's a horrifying, or in some circles, a blast that should move you to tears. w
You can't drive on public roads WITHOUT Baffle, not very much.
With the Baffle on, the volume is a little braver than the OEMSilencer, so this is a peaceful w
SilencerSingle Body reduced the weight by about 2kg, but we also used Seat Rail Reinforcement Plate and Heat Resistant Vantage, so in the end we ended up with It would be a weight reduction of a little over 1 kg. (In any case, it is not a weight reduction that can be felt (crying).
[Included Parts:were they on?
All necessary parts for installation are included; Seat Rail Reinforcement Plate and Heat Resistant Vantage are sold separately.
[Was there anything that disappointed you?
The fact that the installation was Large strange.
Other items that would be helpful
ITEMS TO BUY TOGETHER:For D Tracker and KLX, I would suggest using the Seat Rail Reinforcement Plate. If you don't have Silencer Offset, it won't interfere with the air cleaner box and you may not need Heat Resistant Vantage. Also, liquid Gasket is good to have. Again, we used it at the two connection points between the exhaust pipe and the silencer.View Detail
I installed it on DJEBEL250 XC.
I have no complaints about the lightness, exhaust noise, appearance, etc. and the price is not that high so I am satisfied.
The inner silencer can be removed, but if I remove it, the volume becomes Large, and the necessity of the carburetor setting seems to arise, so I put it as it is from the factory.
The volume after the exchange is a little larger than NORMAL, and the Small sound is comfortable.
As for the installation, it is possible to put it on according to the Instruction Manual, but it might have been easier to understand if there had been a photograph or an illustration.
Also, when I removed the OEM screw, there was one spot where there was an anti-teasing Torque (T-40), and I couldn't get it off in time with the tools I had, so I had to buy one to remove it.
Emblem was peeled off because the edge of the Etching treatment was sharp.View Detail
Fits: YAMAHA serow250 [serow]. -07, YAMAHA XT250X -07, YAMAHA XG250 TRICKER [Tricker]. -07
19’ I installed it in DG31J
Bolt position and exhaust pipeClamp were easily installed
The sound was not bombastic, but with a good amount of bass (As desired.)
Compared to the NORMAL, it is now easier to run because the drainage is better
View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.