- 오토바이 부품
- 핸들 & 컨트롤부품
- 바 엔드
- DAYTONA
- DAYTONA - 바 엔드
- 상품 목록
- 중량 바 엔드
중량 바 엔드
Product # 72044
15,623.57 ~ KRW (1,752 엔)
List price: 21,402.14 KRW Save 최대 27%
+18~ Webike point (160.51 KRW)
주문이 완료되면 제조업체의 재고를 확인하고 확인된 배송 시간을 이메일로 보내드리겠습니다.
Product # 72044
15,623.57 ~ KRW (1,752 엔)
List price: 21,402.14 KRW Save 최대 27%
+18~ Webike point (160.51 KRW)
I replaced the handlebar of my 2018 Suzuki SV650 with an aftermarket brand. New handlebar was made of aluminum alloy and the internal diameter was smaller at 14mm so the the OEM bar end did not fit. This product are heavy and fit perfectly.Waiting for the weekend to test the vibration damping effect on the handlebar.View Detail
여러가지 찾아보던중에 가격도착하고재고도있다고하고 컬러도 마음에들고해서궁새하였다워낙 작은 튜닝 부품이라 무게감이 와닿지가 안왔어요 직점들어보니 크기는 작아도 무게감이 상당합니다 품질등급이 높아보이고 고급스럽게 보여요 건메탈 딱 마음에 드네요 추전합니다 View Detail
I love how Simple it looks!
The weight is lighter than the Ultra-heavy Bar End, but there are no complaints.
And it's helping to reduce some of the vibration, too!View Detail
[How is it used?
The CB125R OEM is replaced with the CB125R MotorcycleBody color is Black. Mainly used for city riding and also for touring about 100km.
Was the one you received as per Image?
I like the Gun meta color, it has a nice texture and is not too assertive.
Was the installation difficult?
Pull out the OEMBar End while twisting it, insert this Bar End, position it, and close the Bolt to complete the installation. It was easy.
Do not forget to install the AxelThrottle side with about 2 or 3mm of clearance.
The CB125R seems to have inner weight or something on the One Side and the included bolt does not fit deep enough, so I bought a 5mm shorter cap bolt and installed it.
How was your experience with it?
The included bolt is a Silver bolt, so I am reattaching it with a Black color painted cap bolt. I like the way it looks tighter.
I think it is only a comforting thought that there will be no dramatic change in vibration reduction due to the fact that the engine tends to run at high RPMs and is a single cylinder.
[Included Parts:were they on?
Includes Bolt and Nut/Rubber weights for Bar EndBody and Bar End.
Only a 5mm Hexagonal Wrench needs to be prepared separately.
[Was there anything that disappointed you?View Detail
I installed it on my REBEL250 SEdition.
I think it works well for vibration control.
The design is also simple and I like it.
However, it was difficult to install in Rebel 250.
Since I changed the Handlebar to DAYTONA 40B Inner Weight, I thought there should be M6 screw cut in the bar, so I removed the Bar End of the Endurance Grip heater, and the Axel side was blocked.
The AxelSlot of REBEL has only a small hole, and because there is no depth, it is not possible to put the Bar End. It is necessary to open the hole of the degree that Bar End enters here. In addition, if the Slot and Bar End interfere, Axel will not return and it will be dangerous.
In order to attach to REBEL250 + DAYTONA40B Handlebar, you need to prepare Bolt.
The one that comes with it is a little longer than 50mm. This will leave you with an extra Bolt, so you will need a 40mm one.
Now the LeftGrip side can be installed.
If you use 40mm bolt for RightGrip (Axel) side, it will interfere with Axel, so you need to put Washer. I put 2 pieces of 1.5mm RubberWasher to avoid the interference with Axel.
The price is low and the effect is good, but I think I should have asked Shop to install it.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.