● 문의 밀착성을 향상시키고 바람의 침입을 막는다!
● 문 부근의 배의 풍향을 알리는 기 소리를 저감!
● 문 주위에 부착만!간단!
[사용 방법]
1. 문 개구부의 본 제품 부착 부분의 기름기, 수분, 오염을 줄이세요. 설치 위치의 길이를 확인하세요.
2. 문을 천천히 벌렸다 오무렸다 한다, 본 제품을 부착 위치를 확인하세요.
*문 쪽의 웨더 스트립과 본 제품이 접촉하고 기밀성이 높아지게, 문 쪽의 웨더 스트립이 보디에 해당하는 위치에 붙입니다.
*바디 측에 웨더 스트립이 붙어 있는 차량은 도어 측에 본 제품을 붙입니다.
웨더 스트립을 수성 펜으로 따라서 문을 닫자 전사됩니다. 몇 차례 반복, 부착 위치의 기준으로 주세요.
3. 리 케이지를 벗긴 후 도어 힌지 부근에서 본 제품을 조금 당기면서 붙이세요.
*중간에서 가로채지 말고 붙이기 시작 한까지 연속으로 보세요. 각 부분은 잡아당기지 않고 밀어붙이기 식으로 붙이세요.
4. 양면 테이프의 접착성을 높이기 위해서 문을 닫고 10분 정도 방치하세요.
●Improves door adhesion and reduces wind penetration!
●Reduces wind noise near the door!
●Just stick it around the door!Easy!
[Instructions for use]
1. Please remove oil, moisture and dirt from the part of the door opening where this product is attached.Check the length of the mounting position.
2. Open and close the door slowly, and check the position of the product.
*Apply the product to the position where the weather strip on the door side touches the body so that the product makes contact with the weather strip on the door side to make it airtight.
*If your vehicle has weather strips on the body side, attach this product to the door side.
Trace the weatherstrip with a water-based pen and close the door to transfer it.Please repeat several times as a guide for the position of the paste.
3. Peel off the "Rikei paper" and stick the product while pulling it a little from the door hinge area.
*Please do not cut the tape in the middle of the paste, but paste it continuously until the paste start position.Do not pull on the corners, but press down on them.
4. Close the door and leave it open for about 10 minutes to improve the adhesion of the double-sided tape.