- This spanner is useful for removing the brake pipe from the brake master cylinder.The quality is not bad and the Torque is firmly in the Pipe, so there is no need to nudge it.자세히보기
- It is easy to remove a hardened Radiator hose or negative pressure hose from the Pipe.The pliers are long and easy to grab even in the deepest places, making them very easy to use and efficient.자세히보기
- The Joint section is also solid and easy to use without rattling.It is very easy to use when Accessing a small area and the quality of Chromium Plating is not bad.It gives a sense of luxury.자세히보기
- It reaches the place where you want it to reach, and the joint part has a firm sense of moderation, so it can reach Nut and Bolt without wobbling. It is easy to use in a narrow space and the color of ...자세히보기
- It is easy to remove the Radiator hose and Negative pressure hose from the pipe. Because Pliers are long and easy to grab even in a deep place, it is easy to use and work efficiency increases. It's a ...자세히보기
- I had to remove the brake pipe from the brake master cylinder with Spanner, and the flare nut wrench will torqueform the pipe firmly, so I recommend you to use it before you torqueform it.자세히보기
- I bought it just to tighten up the Goodridge's Socket when I changed the brake hose, the manufacturer seems to be United States PowerBUILT (not sure of the country of manufacture).If you look for 7/16...자세히보기
- It is very frustrating to try to pick the hose clamp with ordinary radio pliers or pliers, but with this tool, it is easy to pick and hold it with a well.자세히보기
- I am not very good at tightening screws and often work on cutting the tap However, the Handlebar when cutting Tap is long and often cannot work in a narrow place The Ratchet Type Handlebar is useful f...자세히보기
- I bought it because I had to scrape the Seat and replace the epidermisOf course, I used to use the HandTucker beforeNow, I use the HandTucker for temporary fixation, which is easy to pull out of the S...자세히보기
- I always use it for Plug changesThe Wrench in the on-board tool should be considered an emergencyThere is no need to drop the plug to be attached and removed because the magnet is attached to the 3/8 ...자세히보기
- I used to substitute Pipe wrench so far, but it is better to have a special tool. I was able to use without scratching with confidence.I am also solidly making for the price.자세히보기
- This review is for the SANKEN Crochet Wrench Set (Open Small) 5pcs. The item arrived wrapped in plastic as shown in my review photo. The Crochet Wrench Set includes a holder with holes on each end s...자세히보기
- 【What made you decide the purchase?】 I used it for my wife's Mitsubishi Eye's Tie rod end Boots exchange.【How was it actually used?】 I could not use it for SUBARU's sambar because I was sm...자세히보기
- In order to remove the OilStrainer of HYPERMOTARD 796, a large 14 mm hexagon is required. It is essential to Maintenance of Ducati's air cooling engine.Up to now I have used 14 mm Hexagonal Wrench...자세히보기
- The pure Rear suspension of GSX-R1000 K5~6 has an obstructive Swing arm, and the Hook wrench of other in-vehicle tool appropriation does not enter well.
Though it was hard to do some if it was this ...자세히보기 - It purchased, although a Stainless nut is fastened.
It can use also for adjustment of a Rear suspension.
I think that they have improved although other comparisons cannot be performed since it has o...자세히보기 - It purchased in order to remove the Shaft of a Front.
The price was also comparatively cheap and it made it this which uses a sushi Impact.
uses, and since it is solid, this is used for a long time...자세히보기 - It can use for 々 Ideas infinity, such as Accessories installation, attachment of a Cowl, and a move of apparatus.
Isn't there little failure in a gentle Crimp condition?
자세히보기 - It purchases in order to carry out Stainless-bearing exchange. If you can have in a user friendly manner, it is as convenient as something.I think that the price is also reasonable.
자세히보기
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송