 |  |  |
| | | |
 |  |  |
| | | |
 |  |  |
| | | |
 | ||
| |
exellent produit.il a ete tres facile de le monter sur mon st70 6volt de 1973 avec le mode d'emploi et les outil adequates.
On ressent vraiment la qualité de takegawa.
Tout marche très bien sur mo...
The bolt retainer looks great for the cosmetic finishing for any bikes. This made it looks more proper and takegawa made the material looks high quality. Thats great!
If you can think of it as the same etc. as the old KEIHINPC18, it is the same thing.Nice thing1 Response at low and medium speeds has changed dramatically.If it is about 2 75cc, I think the diameter o...
First of all, I checked the Jet before installation and found that both Throw and Main had shiningly shavings. If you use it without checking, it will be clogged. If you use it without checking, it wi...
It's nice to have better footing. The fluffiness is gone. I don't think the road should be so jumpy.It's fine for moderate groundwork. It's just a shame that the price is higher than the performance.
I installed it on my Grom, I had to twist my body to see the back of the OEM mirror, but now I can see better. With this Opposite Thread Screw Type, you can meet the new safety standard by using NORMA...
I put this mirror on my Grom. it's better visibility than normal mirror where I had to twist my body to see the back. With this reverse screw type, I can use NORMAL Mirror Adapter to meet the new secu...
I was able to install it on my SUPER CUB110 JA44 without any problems.I was looking for an Engine Guard to run on forest roads, but I couldn't find one for my SUPER CUB110.I happened to find the insta...
This is a must-have part for carburetor setting, because it is always bad when you mess with the intake and exhaust system of KSR110. However, it is not possible to use it as it is as shown in the rev...
I used it on a CUB50 revision 75.If you have a normal clutch, it will slip, so it's better to do it to properly transfer the Up power to the drivetrain.By the way, I install it myself, so I hope you c...
 |  | |
| | | |
| |  |  |
| | | |
 |  |  |
| | | |
 |  | |
| | | |
 |  | |
| | |
Scooter drivetrain maintenance essentialsWe can't start without it.KN Planning:KN KikakUniversal Holder SUZUKI Serieshttps://www.webike.net/sd/22644793/I bought it to use at the same timeEasy to use a...
There are two types of Recoil packets, 1D and 1.5D, but basically, if you buy 1D, it's not a problem There is none. Because even in JIS. The Bolt's cost is only 1D, as long as the female threads are i...
I used it to exchange Flywheel of LETS 4.Because it is universal, it seems that it can be used for other car models, but the frequency of use is not so high, so it is a product that can not be said so...
When installing Takegawa's Clutch cover, it is necessary to change this.Oil route is slightly processed from OEM Product.Hand dexterous people will be able to process OEM Product, but it is conven...
I bought it for FORZAMF 08 Drive belt exchange. Although the price was reasonable and there was anxiety about the product strength, it was relieved with firm making to actually take it. We use Impact ...
 | |  |
| | | |
 |  |  |
| | | |
I bought it to improve the loading space of my cbr.I put my shoes in it twice and was able to use it properly, but the connection between the mouth of the drawstring and the netted part of the drawstr...
High precision engineering in a quality product. Kit contains everything needed for easy installation. Immediate performance gains by this kit. NOTE - need to run high octane fuel due to increased com...
Installation on the seat was quick and easyHowever, when I pulled the Seat on the motorcycle to test the extension after it was installed, I found that it was not as long as it should be The side open...
I used to use Seesaw Pedal, but it's kind of a normal Shift I wanted to make a change and replaced it Since I only have to remove and replace it, the installation was completed without any problemIt f...
I installed a TM24 Carburetor on my 2nd TDR80I didn't have space to install the Funnel or Power Filter, so it can fit I was looking for things and came across this productAs it is designed for use wit...
These emblems looks very good and they are the best quality you can get. I'm definitely happy with this purchase and can recommend these to other buyers.
However, I can't really feel whether the capacity of this product is getting bigger and bigger It is a disappointing product, but I think it is useful I think you can put it on even if it's not booted
I chose this product to be compatible with Takegawa Special ClutchIt's very easy to install to the Handlebar as you only need the Bolt1 pc If you tighten it up, it won't turn aroundI don't think you w...
Running has improved, but Spring plays and vibration comes out at a constant number of revolutions.Quantity : 2pc. Set I purchased but I think that it is not an individual defective item because the s...
 | | |
| | |
Since there was no Helmet holder, NINJA 400r was attached.
Although there was also make of the other company, the product made from a Takegawa was used.
Since it puts, and it is crowded and it is no...
Attachment is also easy and it has also satisfied the fixing position well exactly! The portion which hangs a Helmet thinks that the size which is generous to a slight degree could be sufficient as h...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
?
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.
"My bike" 서비스에 대해 
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송