SSK 카본 탱크 캡 패드
It may be a little tricky to apply, but I'm satisfied with the look of Carbon Style.
SSK offers mainly exterior parts like aluminum billet parts, screen and so on. Also they offer dry carbon parts as well. Those valuable parts are sometimes difficult to get. SSK offers those parts reasonably priced.
It may be a little tricky to apply, but I'm satisfied with the look of Carbon Style.
I have to find and purchase the bolts because the bolts are not suitable for 2020 s1000rr. The product description in the web never says it is the suitable for 2020 s1000rr. This is a very very bad pu...
I was able to install it without any modification, but it was a little thicker than OEM and the Rivet was very tight, but I applied Silicon grease and pushed it in.
There was no modification to the Rivet, but the Rivet potch is a bit thicker than the OEM, so the Rivet potch became very hard.
There is no particular modification and it is easily put on. I think there is individual difference, but in my case, the space between Tank and Cover is too narrow, so when I kneel grip, it interferes...
OEM has a Cushion on the reverse side of photo 3. I reused it because it is only pasted with double-sided tape.
It's not cool when you put up a stand, but it's pretty stable when you put up a stand, and it doesn't look good, but I'm going to change it to a different stand cover
OEMLever, it's a long time and Quantity:I bought it because I was wondering what a short Lever would do to my ring finger or something when I held it with my 2pc finger or something.I held it with thr...
The texture is goodThe 500ml plastic bottle interferes slightly with the Max widthWhen I say snug, I mean it's snug, so you won't have to worry about it falling out However, that's why it won't fit if...
Maybe it's because the OEM and Bolt materials are differentIt felt like a bite in the middleNo more torquingThere's a chance it won't come off againI gave up on it because it is thereIndividual differ...
The position of the brake lever is too far away, the closest position is about the normal position If you have a throttle assist, it may not work for you
I purchased it because I wanted to exchange OEMLever for BALIUS 2.I was looking for an inexpensive one with an Adjust lever and I arrived at this item.Color is Gold, Adjust part is Black.Installation ...
I wanted a Short lever, I thought that if it all seemed Black, I did not look closely at SilverLeverBlackBody.I thought that I had bought GarbageLever because I did not have a 6 mm hole color at the i...
Because there is a habit of hanging your finger on Lever when drivingAt the OEM position the fingertip was hard to get on LeverCome to your preferred position in 6 stepsOEM is fourth placeJust in case...
Because the garage is narrow, I tried to make Short lever to try to secure even a little passage width. Select Blue's Adjuster for Silver Lever. There was the same combination in the product photo...
The short length and adjustability is great for someone with short fingers like me, allowing me to respond better. Great look that suits the modern style of the bike.
There is no worry of cracking like resin with Aluminum Material.Although it is not difficult with regard to installation, even if you tighten Bolt considerably with Spacer rubber in it, Firmly is not ...
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송