스페이서적 조정 (와셔류)
Product # 0900-463-90001
2,636.07 ~ KRW (296 엔)
List price: 2,671.69 KRW Save 최대 1%
+3~ Webike point (26.71 KRW)
주문이 완료되면 제조업체의 재고를 확인하고 확인된 배송 시간을 이메일로 보내드리겠습니다.
Product # 0900-463-90001
2,636.07 ~ KRW (296 엔)
List price: 2,671.69 KRW Save 최대 1%
+3~ Webike point (26.71 KRW)
Thick boss → narrow boss Spec. I thought about changing, KITACO 0. We bought 5 mm Washer, OEM fine boss & Washer at the same time.
Why? KITACO 0. 3mm Washer had (I might have purchased it by mistake before)
Wait, things are fine boss Spec. And Taiho Boss Spec. I would like to enjoy setting carefully which is better.View Detail
It purchases to DIO110.It is an object for fine adjustment of the
drive system.Since there are the
bore, an outside diameter, and quite a many thickness, even if there are no conformity goods, it is good to be able to use it by gauging.
Does it change so far for 300 yen per sheet!? He was surprised at the time of a beam with a boss Washer to begin with
.It was hard to think that I will tune the rest finely by a Shim washer this time [
] if it says to the grade which is a Roller Setting.
> -- Although it measured once, and 16 phi was purchased since it was about 15.5 mm --
15phi is likely to enter. --
-- I remeasure once again and think that I will also purchase and try 15 phi.although
> thickness is only 0.3 mm and 0.5 mm, since it can try only on buying two kinds with 0.3 mm, 0.8 mm, and 0.6 mm, it brings to fine adjustment and is -- it is .If it worries about the
> drive system, once it will put in, I will think that it is good.Since
one has solved at a stretch only by putting in one sheet 0.3-mm from the state of being unable to be easily convinced, doing Roller exchange repeatedly until now --View Detail
It attached to the pulley boss of an aprio (4JP8).
It is a size of the inside diameter phi 13 and the outside diameter phi 21.
0.5 mm in thickness and 0.3 mm were purchased, respectively.
I think that it is good to be able to change composition according to the state of a belt since the thickness of Sim has a variation.
For the moment, since the belt is in a new state, 0.5 mm is attached and the drop lump of a belt is carried out.
0 start acceleration became quite good.View Detail
It purchased in order to suppress shakiness of the floating pin of a brake rotor instead of the original purpose of use.
Since rotor thickness was 4 mm, even if 3XV type TZR carried out the kiln of the wave washer, since there was much GATA, it was in floating whose diameter of inside and outside is ideal in this Sim of exactly by the pin for 5mm.View Detail
It is used with the zoomer (ruckus) of HONDA.
Acceleration of the low speed area improved by inserting between a good point pulley and a boss.
If it is this engine performance at this price, it is five-stars evaluation without a complaint.
it is also that there is also width of setting to some extent since the thickness difference is also released -- it is .
Since rotational frequency exceeds 8000 rotations, it is introductory Mandatory of external CDI.
Bad point Although there is no bad point in particular, there are notes.
If it equips with these parts, rotational frequency will go up rapidly.
If rotational frequency is not managed with a tachometer etc., an engine will break.
Since a tachometer function also follows if it is a takegawa and a digital meter of ACEWELL, it is a recommend.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.