FCR 기화기
Product # 301-35-408
741,084.91 KRW (83,104 엔)
List price: 775,417.51 KRW Save 4%
+831 Webike point (7,410.49 KRW)
제조 업체 재고가있는 경우, |
Ships around 5th Apr. 2024? |
다음 배송 날짜는 Webike에 문의해 주세요 |
Product # 301-35-408
741,084.91 KRW (83,104 엔)
List price: 775,417.51 KRW Save 4%
+831 Webike point (7,410.49 KRW)
제조 업체 재고가있는 경우, |
Ships around 5th Apr. 2024? |
다음 배송 날짜는 Webike에 문의해 주세요 |
Model Page Links
Fits: HONDA FTR250 (Not available with cell.)
To be honest, the FCR Carburetor Body of 35Φs on the 250cc Motorcycle is too large.
33Φ seems to have a wider range of settings.
Originally, the FTR250 came with a carburetor, a mechanism similar to the FCR Carburetor Body.
However, the OEM carburetor has poor leadership and the acceleration pump is bad or the setting is not perfect.
I thought maybe the carburetor was not good enough, so I installed the FCR Carburetor Body.
Then it was as if it was a completely different Motorcycle.
If you do the Throttle in No Chalk and then KICK it after 3 times of Kashkashkashkashkash, it's a one-shot instruction every time (laughs).
If you get into a good mood and overdo the crush, you'll get a snooze, but it usually starts great.
The performance is perfect and it feels like it's powered up in the whole RPM range.
It wasn't the OEM carburetor, something like the Power band was born and I keep opening the Throttle too much.
I didn't realize how much of a difference the FCR Carburetor Body would make!View Detail
Fits: KAWASAKI Z1300/KZ1300
Another great product from Bito JB power. Best customer service in the industry. Quality was top of the line and they operate flawlessly. Deeply impressed. View Detail
Loving these 33mm FCR carbs! Bike is a 1992 GSF 400 with .04 over Suzki pistons and gk73 GSXR 400 camshafts. Tune: 125 Main Fuel Jet, 200 Main Air Jet, 42 Slow Jet, 2 1/2 turns out on fuel screw, 3/4 turns out on air screw. View Detail
OEMCVK #4Slide valve is worn out and sucks secondary air, so negative pressure is not stable. FCR was the only choice.
Disassembled for inspection of each part and sprayed with Bell Hammer for bearing. Commercialized by Kyoritsu Kougei Co. SEPBearingGuide" The order was placed to install the But I am not sure when it will be delivered. This will protect the Throttle valveBearing from cutting the groove in the Carburetor Body.
I hope it comes soon.
I don't know how well it works myself because I haven't assembled and ridden it yet, but the fact that so many people have used it is the best proof of all.View Detail
Fits: HONDA RVF400 (NC35), HONDA VFR400R (NC30)
The racing cabs are very easy to set up, and once you get the settings right, you will be amazed at the acceleration power you can get. However, setting is very difficult. It is very difficult to set up the engine, because it is mainly used for touring, and it is hard to set up the engine without stress at all openings from the bottom to the top. It is also difficult for amateurs to judge whether the jet is too thick or too thin. Considering the time and risk, I think it is better to leave the setting to the store, but I am impressed when the motorcycle runs after setting by myself.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.