수온 대응 (-19.5에서 99.9도)
[상품 내용]
콤팩트 텡프 미터 본체 X1
·서미스터 (R1/8테이퍼 나사 센서) X1
·서미스터 조인트 케이블 (약 1.000mm) X1
매직 테이프 (25mmX55mm) X1
예비 버튼 전지 (LR44타입) X1
·취급 설명서 X1
노이즈 컷 필터
*기름 온도계로는 사용 불가합니다.
*백 라이트 기능, 시계 기능은 없습니다.
*차량에 따라서는 노이즈 컷 필터 (63487) 아니면 물 온도 표시가 안정되지 않는 경우가 있습니다.
*상품의 사용 가능한 서미스터 (설정 저항) 이 다릅니다. 주의하세요.
*서미스터 (R1/8테이퍼 나사 센서) 옥죄기 토오크는 10-13.5N·m입니다.
*서미스터 (R1/8테이퍼 나사 센서) 를 다시 이끌어 낼 경우에는 반드시 새로운 실 테이프를 사용하세요.
*본 상품을 여름의 땡볕으로 사용되자, 액정 패널이 검게 될 경우가 있습니다. 이는 액정 패널의 허용 온도를 넘으면 일어나는 현상으로, 미터 본체의 온도를 낮추기로 해소됩니다.
*대응 차종은 수온계로 사용하는 경우입니다. 상품 부속의 센서를 순정 센서와 교환합니다.
*HONDA HORNET600만 장착 위치가 실린더 헤드 후방의 장착이 되오니 주의하십시오.
Water temperature support (-19.5 to 99.9 degrees)
[Product Description]
・Compact balance meter body x 1
・Thermistor (R1/8 taper screw sensor) x 1
・Thermistor joint cable (approx. 1.000mm) x 1
・Velcro (25mm x 55mm) x 1
・Spare button battery (LR44 type) x 1
・User's Manual x 1
With noise cut filter
*Not for use as an oil thermometer.
*No backlight function, no clock function.
*In some vehicles, the water temperature display may not be stable unless a noise cut filter (63487) is installed.
*The thermistor (setting resistance value) that can be used differs depending on the product.
*Tightening torque for thermistor (R1 / 8 taper screw sensor) is 10-13.5N-m.
*When reusing and installing the thermistor (R1 / 8 taper thread sensor), be sure to use a new sealing tape.
*If this product is used under the hot sun in the summer, the LCD panel may turn black.This phenomenon occurs when the temperature of the LCD panel exceeds the allowable temperature, and can be solved by lowering the temperature of the meter itself.
*Compatible models are for use as a water temperature gauge.Replace the sensor supplied with the product with the stock sensor.
*Only HONDA HORNET600 is installed at the rear of the cylinder head.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.