SPII전 출력 키트
Product # 00301
635,862.7 KRW (71,400 엔)
List price: 696,421.05 KRW Save 9%
+714 Webike point (6,358.62 KRW)
Product # 00301
635,862.7 KRW (71,400 엔)
List price: 696,421.05 KRW Save 9%
+714 Webike point (6,358.62 KRW)
Model Page Links
For now, rotate to Smooth.
Level where everyone can see the changes.
The installation was done by Motorcycle shop.
Very effective even in Normal cab.View Detail
important item
[Was there anything that disappointed you?
One thing I knew beforehand from other reviewers is that there was no safety device on the Side Stand. I am going to take care of the safety device from time to time.
Do you have any wishes or improvements you would like to make for the Manufacturer?
I think the Side Stand safety device should be addressed.
I'm not sure what to do, but I'd like to know what I can do. I'd also like to see the option that corresponds to the 8mm cord.
If possible, I think it would be better if the Wiring on the Control Unit were to go out the back.
[Do you have any products to compare it to?
I was thinking of the OEM Ignition coil and Igniter.
What made you decide to buy?
I was thinking of renewal with OEM, but because Igniter had been discontinued, I was considering Votani. The fact that there was almost no Review that it was broken and the thing that after follow-up seemed to be firm in Japan of security became the decisive factor of purchase.
How was your experience with it?
We thought the OEM would be sufficient, but when we got it running. Well, how wonderful. I don't know the high speed range because I haven't driven on the highway yet, but I can feel the hackles and power up at low and medium speed, and the acceleration feeling is completely different. It makes me feel good to drive.
Was the installation difficult?
It was Large strange to thread the Boots through the plug cord. But it was not easy to use the 7mm cord, because it was not compatible with the cord. I had no choice but to put it directly on the NGK power cable, but I thought it would be more difficult because it is 8mm cord. My fingertips were swollen after doing this work.
【Please tell me the installation point and hang】
In order to be able to install Control Unit in the position which can access Dial, I removed the Accessory Case, made a place, and fixed it with Magic tape so that it can be removed. Afterwards, when Boots is passed through after it warms, it becomes easy to enter somewhat. In addition, I think that you should choose the thing which the covering is firm and hard to Gap as for the plug cord.
[Was the Instruction Manual easy to understand?
The Instruction Manual is concise, but the installation itself is not difficult, so I didn't have any trouble with it.
[Included Parts:were they on?
I didn't use it, but it had Double-sided Tape and Tie Wrap in it.
[Others]
I practiced spreading Gap using old Plug because I had never done it with 2-pole Plug, but I broke two of them and gave up. I will adjust it after learning how to do it.
I want to fill in when Gap adjustment is finished.
The exhaust system also only changed Silencer with a normal cab and PlugGap is also in the state of the unadjusted state, but I felt hack drills and power up. I think that this is a good thing more than the price.View Detail
The Engine's performance is very good after I put these on
I have an FCR Carburetor body and I twisted Axel before turning the Cell But since I put this on, I've been able to hang the Axel without twisting it I was impressed
Engine RPM (Rev.) You can also set the ignition timings
I was in the best shape for myself, number 6
Large Satisfied
View Detail
Idling is very stable and there is no more cover Until now, it was difficult to fire a single shot when idling and it was blown out of the air at about mid RPM But after installing SP-2, it doesn't hang around at all, and the ride becomes Smooth I did I think the low RPM torque went up as well
I bought this along with the Carburetor setting I think you should have itView Detail
Where I live I will install various parts at this time of snow when it is winter It is difficult to see running It is difficult to judge whether it is good or bad Spring is attached Easy to install because it only connects the Coupler Coil
When attaching to Frame, attached Material : I squeezed the color of Aluminum, but my hands did not fit in and dropped into the car body together with Bolt Missing missing Plug cord used objects of 7 mm diameter so it is easy to install it without difficulty
I used Windshield IRIDIUM, so I'm going to try Gap if it is good or bad whether it's spring or notView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.