원숭이/고릴라, 원숭이 R의 휠을 장착할 수 있는 스윙 암입니다.
스잉그ー아ー무 폭은 188-191mm에 맞게 제작하고 있습니다.
멍키 R의 10인치 휠을 사용하여, 원숭이를 10인치화할 수 있습니다.
■ 옵션 설명
[스윙 암 마무리]
블랙 알루마이트 가공 (G크래프트 품번:60198) +25000엔
·세라 코트 마무리 (G크래프트 품번:60807) +30000엔
[세라 코트는?]
세라 코트는 NIC사제 페인트로, 현재 미국 군 부대에 사용되는, 특수한 인화 도장, 상온 도장입니다.
가혹한 조건에 대응할 수 있도록 검사되어 내열, 내마모 내구성, 내 것이 좋았고 방열, 단열 등 성능 위주로 연구 제작된 도료입니다.
세라믹 특수 기계에 의한 분쇄하고, 도료에 혼입시키고 도막의 강도를 향상시키고 있습니다. 그래서 배의 표피 모양의 표면에 되지만, 도막이 매우 얇은 수 있습니다 (25마이크론)
용접 자국 (비드) 숨지 않고 남겨둘 수 있습니다.
밀착성은 코팅 재료 중에서도 최고치에서, 쭈그리고도 주름이 잡히지 않고 징검다리에서도 페인트가 벗겨지기 어렵기 때문에, 프레임, 스윙 팔에 적합한 표면 처리 되어 있습니다.
*통상 납기+3-5주일 정돕니다.
[옵션:체인 슬라이더 사양]
체인 슬라이더 볼트 멈추고 사양 (G크래프트 품번:60228) +1000엔
체인 슬라이더를 리벳 끝에서 볼트 통제에 변경합니다. 마모된 경우의 교환이 쉽게 합니다.
[옵션:스탠드 훅 베이스 추가 가공]
스탠드 훅 베이스 (M6) 추가 가공 (G크래프트 품번:60903) +3000엔
G크래프트제 스탠드 훅, 또는 사외제 스탠드 훅 (M6) 를 장착할 수 있습니다.
[옵션:피벗부 구조]
피벗부 베어링사 (G크래프트 품번:60006) +3000엔
표준은 부시의 피벗부를 베어링에 변경합니다.
내구성 향상과 원만한 동작 특성을 실현하고 있습니다.
This is a swingarm which can be used for Monkey / Gorilla with Monkey R's wheel.
The width of the swinging arm is designed to be 188-191mm.
It is possible to use the 10 inch wheel of Monkey R to make Monkey 10 inch.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.