스윙 암 중량:정상 3.5kg→ 1.8kg (GROM용, 트리플 스퀘어, 스태빌 없이,+0cm)
스윙 암의 재질에는 알루미늄 7N01자재를 사용하여, 순정 스윙 암 3.5kg에 대해서 1.8kg와 경량적이고 강성에 마무리하고 있으며, 바네하 중량 경량화에 의한 오토바이의 조작성을 향상시킵니다.
■ 옵션 설명
[스윙 암 마무리]
블랙 알루마이트 가공 (G크래프트 품번:60198) +25000엔
·세라 코트 마무리 (G크래프트 품번:60807) +30000엔
[세라 코트는?]
세라 코트는 NIC사제 페인트로, 현재 미국 군 부대에 사용되는, 특수한 인화 도장, 상온 도장입니다.
가혹한 조건에 대응할 수 있도록 검사되어 내열, 내마모 내구성, 내 것이 좋았고 방열, 단열 등 성능 위주로 연구 제작된 도료입니다.
세라믹 특수 기계에 의한 분쇄하고, 도료에 혼입시키고 도막의 강도를 향상시키고 있습니다. 그래서 배의 표피 모양의 표면에 되지만, 도막이 매우 얇은 수 있습니다 (25마이크론)
용접 자국 (비드) 숨지 않고 남겨둘 수 있습니다.
밀착성은 코팅 재료 중에서도 최고치에서, 쭈그리고도 주름이 잡히지 않고 징검다리에서도 페인트가 벗겨지기 어렵기 때문에, 프레임, 스윙 팔에 적합한 표면 처리 되어 있습니다.
*통상 납기+3-5주일 정돕니다.
[옵션 1] 체인 슬라이더 볼트 멈추고 사양 (G크래프트 품번:60228) +1000엔
체인 슬라이더를 리벳 끝에서 볼트 통제에 변경합니다. 마모된 경우의 교환이 쉽게 합니다.
[옵션 2] 피벗부 베어링사 (G크래프트 품번:60006) +3000엔
표준은 부시의 피벗부를 베어링에 변경합니다.
내구성 향상과 원만한 동작 특성을 실현하고 있습니다.
[옵션 3] 스탠드 훅 베이스 (M6) 추가 가공 (G크래프트 품번:60903) +3000엔
G크래프트제 스탠드 훅, 또는 사외제 스탠드 훅 (M6) 를 장착할 수 있습니다.
[옵션 4] 체인 끌옵션
레이싱 스탠드 훅 사양 (G크래프트 품번:60186) +3000엔
기존의 체인 끌후부를 스탠드 훅 사양하세요. G크래프트 품번:32071·32072·32073경주용 스탠드 훅을 달 수 있습니다.
*G크래프트 품번:33170AP록히드 캘리퍼 서포트 장착 불가 (참견하세요)
·뒤 끌타입 (G크래프트 품번:60221) +3000엔
체인 조정 시 정비의 번거로움을 해소하기 위해서 고안된 뒤 끌어저스터입니다.
스윙 암 최후부에 어드저스트 넛이 와서 공구의 간섭 등으로 돌리기 어려웠다 어드저스트부의 조정이 쉽게 됩니다
*레이싱 스탠드 훅 사양, OW형에 동시 착용은 불가
·OW형 (G크래프트 품번:60014) +3000엔
체인 그부분을 테이퍼 가공함으로써, 액슬 샤아 프트의 상하의 차이를 없앴습니다.
테이퍼 가공된 칸이 움직이므로 상하의 차이가 없습니다. 빅 오토바이의 스윙 암에도 채용된 기구입니다.
·OW형 레이싱 스탠드 훅 사양 (G크래프트 품번:60188) +5000엔
OW타이프 체인 끌후부를 스탠드 훅 사양에 변경합니다.
G크래프트 품번:32071·32072·32073경주용 스탠드 훅을 달 수 있습니다.
*G크래프트 품번:33170AP록히드 캘리퍼 서포트 장착 불가 (참견하세요)
· 색다르식 (G크래프트 품번:60199) +6000엔
카와사키산 오토바이의 흔한 색다르식 체인 할인 됩니다.
*디스크사에 사용하는 경우, 스윙 암 하부에 캘리퍼의 붙은 타입의 캘리퍼 지원만 사용하세요.
[옵션 5] 차고 조절식 서비스 마운트 기능 추가 가공 (G크래프트 품번:60057) +5000엔
상하 조정 폭이 7.5mm의 차고 조정 기능을 가진 사스함에 변경합니다.
산의 부분을 움직이는 것이고, 쉽게 리어의 차고를 변경할 수 있습니다.*NSR50/80용아 충격 전용 설계
Swingarm Weight: Stock 3.5kg→1.8kg (for GROM, triple square, no sway bar, +0cm)
The swingarm is made of aluminum 7N01 material and it is 1.8kg lighter than stock swingarm 3.5kg.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Chain adjuster option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60199)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.
[Option 5] Ride height adjustable suspension mount function addition processing (G-Craft part number: 60057)
It is changed to the suspension receiver with the height adjustment function of 7.5mm.
By moving the mountain part, you can easily change the rear ride height.*Exclusively designed for NSR50 / 80 rear shock.