0mm백/0mm업
0mm백/10mm업
0mm백/20mm업
10mm백/10mm업
10mm백/20mm업
20mm백/10mm업
20mm백/20mm업
20mm백/30mm업
호평을 받고 있습니다 RSV1000용 백 스텝 키트에, 브레이크 페달 부속 버전이 추가로 되었습니다.
기존 제품은 프레임 측에 설치된 브레이크 페달에, 가변식 익스텐션 어댑터를 받고 있었습니다만, 이 타입 2는 스텝 바와 동축의 브레이크를 장비하고 있습니다 (브레이크 마스터 실린더는 정상을 사용합니다).
이에 따라페달 급습 시에도, 페달 칩은 스텝 바와 동축 상의 움직임을 하기 때문에, 위화감 없이 조작을 할 수 있습니다.
페달에는 스핀들 부분에 베어링 더불로 배치, 가타을 철저히 배제하고 있습니다.
또 스텝 바는 절삭으로 렛 가공에서, 최고의 논슬립성을 자랑합니다.
스텝 포지션은 기존의 타입과 마찬가지로, 8자리 가변에서, 모든 주행 단계에 대응하고 있습니다.
컬러는 실버 혹은 블랙 알루마이트에서 선택하여 주시겠습니까.
0mm back / 0mm up
0mm back / 10mm up
0mm back / 20mm up
10mm Back / 10mm Up
10mm back / 20mm up
20mm Back / 10mm Up
20mm Back / 20mm Up
20mm back / 30mm up
The rearset kit for the RSV1000 is available with a brake pedal.
Conventional products have a brake pedal mounted on the frame with a variable extension adapter, but this Type 2 has a brake pedal that is coaxial with the step bar (the stock brake master cylinder is used).
This allows the pedal tip to move on the same axis as the step bar when the pedal is depressed, so that the pedal can be operated without any discomfort.
The pedals are equipped with double bearings in the spindle section to eliminate any rattle.
The step bar is machined and knurled for the best non-slip performance.
The step position is the same as the conventional type, 8 positions adjustable, and it is suitable for any driving stage.
You can choose the color from silver or black anodized aluminum.