- 오토바이 부품
- 브레이크
- 브레이크 캘리퍼 브래킷
- PLOT
- PLOT - 브레이크 캘리퍼 브래킷
- 상품 목록
- 캘리퍼 서포트
캘리퍼 서포트
Product # PCS268
93,188.5 KRW (10,450 엔)
List price: 97,424.34 KRW Save 4%
+105 Webike point (936.34 KRW)
이 상품은 생산이 중단되었습니다. |
Fitment
Open Fit Model Information TableProduct # PCS268
93,188.5 KRW (10,450 엔)
List price: 97,424.34 KRW Save 4%
+105 Webike point (936.34 KRW)
이 상품은 생산이 중단되었습니다. |
Fitment
Open Fit Model Information TableFits: YAMAHA RZ350 81-82, YAMAHA XJ400ZE 80-82, YAMAHA XJ400ZS 80-82, YAMAHA XJ400Z 80-82, YAMAHA XJ400D 80-82
The caliper supports arrived very quickly all the way from Japan and the parts are of very high quality and fit perfectly. I will be fitting them to my UK 1980 Yamaha RD350LC (4L0) (also known as RZ350 in other countries) and I am very pleased with them. When I have fitted them I will attach another photo to this review.View Detail
Fits: YAMAHA RZ350 81-82, YAMAHA XJ400ZE 80-82, YAMAHA XJ400ZS 80-82, YAMAHA XJ400Z 80-82, YAMAHA XJ400D 80-82
I bought this because I went with brembo.
Of course, Exactly is attached, but you need to adjust the Shim to get Center.View Detail
This is a must have part for brembo installation.
I was not sure if it was Radial Mount or Axial Mount, but Axial is enough because it is OverQuality.
To install, just mount it on the Front fork and assemble the Caliper.
However, Aluminum Cut-out is not the same as "It's just the way it is. The feeling is ……
I think GCraft's Black Anodized Aluminum was more natural. (Sweat) 。View Detail
I used it in the field where I put brembo4POD on VT250 SPADA.
The one I received is the one with no problems.
The BoltQuantity is included with the Caliper.:There are 2pc.
Be sure to check the fastenedTorque properly.
I think the Pad on the inside diameter side of the disc is slightly sticking out.
I tried to put it as far out as I could, but it was still too far. (;^ω^) It's like
What does it look like in RS?
Didn't seem to be a problem on the test drive.
It may be that it is still a self-responsibility as long as the conformity is not indicated by Manufacturer.
I don't think you'll have to spend a lot of money on Ok.View Detail
Fits: KAWASAKI ZZR400 90-92, KAWASAKI ZXR400R 89-99, KAWASAKI ZXR400 89-99, KAWASAKI ZXR750R 91-96, KAWASAKI ZXR750 91-96
[How is it used?
Used in the OEMRotor300 era.
Silver, Compact and thick.
I didn't feel rigid anxiety.
Although the hole dimensions are provided, installation should be done with the Caliper on the side that it is going to move against the Fork outer during breaking and then bolt it in place.
Otherwise, the frictional force caused by the bolt tightening alone may cause the risk of gapping.
Was the one you received as per Image?
Yes
Was the installation difficult?
It's easy if you know the hang and the concept.
How was your experience with it?
OK
[Included Parts:were they on?
Yes, I was wondering if Shim was there.
[Was there anything that disappointed you?
NoneView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.