[사양]
보어 50mm
[세트 내용]
실린더
피스톤
헤드, 베이스, 개스킷
피스톤 링
피스톤 핀
·서클 립
·머플러 가스킷
*≪ 부속하지 않은 파트 ≫ 머플러 스터드 볼트 [단 재사용 가능] /니들 베어링 (오바타 베어링) [다시 사용할 수 있습니다만 가능하면 신품으로 교환하세요.
*공도 사용의 경우 배기량 변경 신청을 하세요. 지방 자치체에 따라서는 배기량 변경에 따른 번호가 변경되는 경우 등도 있습니다.
*키트에 관해서는 엔진 부품입니다 이용 규약 기재 대로 장착 후의 타는 부품의 파손, 손상, 다른 손상, 고장에 의한 반품, 환불, 교환, 변상은 일절 접수되지 않으므로 양해한 후에 다시 주문 메일을 부탁합니다. 이해 할 수 없는 경우는 죄송합니다만 판매가 되지 않으므로 양해 바랍니다. 장착 전의 불량품 교환, 반품, 환불은 접수 할 수 있지만, 장착 후에 관해서는 불량품이라도 반품, 환불은 일절 없습니다.
[Specification]
・Inner diameter 50mm
[Set components]
・Cylinder
・Piston
・Head, Base and Gasket
・Piston ring
・Piston pin
・Circlip
・Exhaust gasket
*[Parts not included] Exhaust stud bolt [but can be reused] / Needle bearing (small end bearing) [can be reused but please replace with new one if possible]
Some local governments may change the license plate number due to a change in engine displacement.
*The kit is an engine part.As stated in the terms of use, Kany returns, refunds, exchanges, or compensation for burnout, broken parts, damage to other parts, or failure after installation is not accepted.You can't buy it without your understanding.Exchange, return or refund for defective products before installation is accpeptable, but return or refund after installation is not even if the product is defective.