- 오토바이 부품
- 서스펜션 / 리어세트 / 휠 / 스윙암
- 하부 컨트롤
- 리어세트 키트
- BEET
- BEET - 리어세트 키트
- 상품 목록
- 슈퍼 뱅크 백 스텝
슈퍼 뱅크 백 스텝
Product # 0106-K33-00
542,798.76 KRW (60,950 엔)
List price: 542,798.76 KRW Save 0%
+610 Webike point (5,432.44 KRW)
이 상품은 생산이 중단되었습니다. |
Product # 0106-K33-00
542,798.76 KRW (60,950 엔)
List price: 542,798.76 KRW Save 0%
+610 Webike point (5,432.44 KRW)
이 상품은 생산이 중단되었습니다. |
Model Page Links
The overwhelming difference between us and other manufacturers is that we can do Tandem.
OtherManufacturer is mostly solofootpeg.
If it is difficult to install, it may be cheaper to order it from Shop and have it installed.
I put it on myself, but it was quite difficult to adjust the BrakeSensor.
The Position is also good and easy to grip the knee.
It also has BEET stamped on it and looks good.
It's just a shame that the only color available is Silver for the first semester.
Because it seems that the late model can be Color Anodized Aluminum in the option, the person who is riding the late model and wants to specify the color is also recommended to buy in the direct sales of BEET.View Detail
I think the quality is very good though it is high!
Although it seems to be very personal installation, I believe that there is no mistake as it is a reliable BEET that seems to be somehow looking at the Instruction Manual!
View Detail
I feel a sense of incongruity in the position of OEMfootpeg "One day it's BEET's Rear Sets !!" As I was thinking, I found a used beauty goods at a certain Oak station! Although I could successfully bid successfully, because the LINK section was a missing item, please send the ProductNo table to BEET, order the parts with Webike and install it did. For installation, we sent the parts development map together at the time of requesting BEET to ProductNo table, so we successfully completed the installation.
Impression after installation, but Back17. 5mm / Up9. The sense of incompatibility was resolved by the Back amount aimed at 5 mm.
The next day after sending the e-mail requesting documentation to BEET this time, I got an answer and confirmed the ProductNo table Bolt 1 pcSpring 1 pc. It is very easy to order because it is managed from ProductNo from ProductNo, it was possible to order parts arrival and Large change Smooth in about 1 week after ordering parts via Webike !! "BEET of a well-established store and After Service are also wonderful !!" I felt it..View Detail
While there were some outside footpegs, I chose BEET made the most likely change of 15 mm Back, 50 mm Up
Although it may seem to be somewhat compared with the colorful footpeg which has been frequently seen recently, it has become beautiful finish to every narrow place and it looks satisfying
The attachment arrived at the Shift Pedal side without any problems, but as the Brake pedal side got 50 mm higher, the Hose from the MASTER interfered with the Frame and did not attach as it was, and together with the Rear's Brake Pads exchange Hose I changed the way I walked on, and finally I got a footpeg. (I do not know if all of the CBR 250 RR will be in the same situation. )
When straddling, you can immediately feel that footpeg is high, but Impact of height is strong, so feeling that it fell backward is not so much.
Vibrations from footpeg both in the downhill and high speed are almost the same as OEM, and the fatigue of the position becomes high etc etc etc. Even I did not feel it.
Because it became not Foldable, Winding became more enjoyable than before than Corner's stiffness and controllability has increased.
Although the operability of the case Pedal, Shift Pedal adjusted the angle slightly during installation, it became easier for GEAR to enter than at the time of OEM.
On the Rear brake side too, Lever's power point is Quantity : There was 2pc so I was concerned, but there is no particular problem.
I think that the price is high in the same type of footpeg, but I am satisfied with the performance and change corresponding to it.
View Detail
First of all, BEET have hit it out of the park in terms of quality and to top it off, everything was packaged separately to aid installation which was a breeze following the included diagrams, which were very detailed and concise. All hardware is included and the stock rear brake sensor can also be fitted. Probably the best option out there for MC22 rearsets. I can not recommend them enough! View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.