● 신형 체인 블록
고 자형 어저스터에서, 액슬 주위의 강성 업과 작업성을 향상 조정 정밀도가 높아질 것으로 리어 주변의 정도 관리에 위력을 발휘합니다. 깎아 내모노 블록 구조, 알루마이트 가공.
● 레이싱 스탠드 훅 표준 장비.
● 피벗 베어링
니들 베어링과 볼 베어링을 채용 레이디얼 방향, 추력 방향으로 가타을 최소한으로 억제합니다. 그리스 업 등 관리성도 향상시켰습니다.
● 머시닝의 로고집.
디자인에 뛰어난 정밀한 부분 구성을 실현.
타이프 10 (스태빌자) 는 스태빌의 다리 부분을 깎아 내는 부품에 하는 일이고, 추가 정밀도와 강도를 향상시켰습니다.
타이프 9,10의 메인 파이프에는 타입 7&8과 같이, 80mmX40mm의 『 눈의 글씨 단면 』 구조의 대형 부리 파이프를 사용.
・New chain block
The U-shaped adjuster increases the rigidity of the axle area and improves workability.By increasing the accuracy of the adjustment, it is effective in managing the alignment of the rear area.Machined monoblock structure, Anodized aluminum finish.
・Racing stand hook as standard equipment.
・Pivot bearing
Needle bearings and ball bearings are used.Minimizes radial and thrust rattle.Easy maintenance such as greasing has been improved.
・Logo insertion by machining.
Precise parts configuration with excellent design.
・Type 10 (with stabilizer) has the stabilizer leg machined to improve the accuracy and strength.
・The main pipe of Type 9 and 10 is made of a large square pipe of 80mm x 40mm with a "cross section" structure as in Type 7 and 8.