슈퍼모타드 테일 키트
Product # 1157059
71,251.3 KRW (7,990 엔)
List price: 74,684.57 KRW Save 5%
+80 Webike point (713.4 KRW)
제조 업체 재고가있는 경우, |
Ships around 5th Apr. 2024? |
다음 배송 날짜는 Webike에 문의해 주세요 |
Product # 1157059
71,251.3 KRW (7,990 엔)
List price: 74,684.57 KRW Save 5%
+80 Webike point (713.4 KRW)
제조 업체 재고가있는 경우, |
Ships around 5th Apr. 2024? |
다음 배송 날짜는 Webike에 문의해 주세요 |
Model Page Links
Matching is good because it is designed for each car model.
If I say in detail, the position of the screw hole of the installation has some gap, so I think that some Skill is necessary for the installation ….
So much satisfaction for all that hard work!View Detail
I followed the instruction manual and the mounting holes didn't quite fit.
When the screw hole is matched with Gap and screw hole, it is not possible to hook the screw hole when it is hooked though the Rear side is hooked with the screw stopper.
I thought the price was cheap and the design was good, but the accuracy was poor.View Detail
i installed it on klx250
The difficulty level is normal, I think you can install it in about 2 hours even if you take it easy
Rather, I thought it would be strange to remove Cowl and Blinker, and put them back on, but I thought it was Large I think
In terms of accuracy, it's about as good as it gets It's good for people who want to make a cheap Fender Eliminator
Now you can prepare a reflector separately
View Detail
There are plate thickness of Bracket, BALI is also small, I can evaluate the point that OEM Parts can divert
Anyway I could not understand the Instruction Manual
Especially when building around Blinker according to Instruction Manual the tool does not enter Level
In addition, just by installing Blinker's Bracket why I am using Bolt With Hexagon Hole
Those who own only Spanner and Driver will run into hurry to the Home center
Also, Reflector necessary for regulations is not attached
It was troublesome to have to purchase separately
"If you buy this kit you can easily do Fender Eliminator" If you like it
It was a product that there was a feeling that hands could not reach it where it is itchyView Detail
KLX250 (08-) Attached to.
I have written other people, but because I use OEMFender's Bush and Screw, the only remaining is OEM Tail lamp and Fender.
It was the cheapest in the Fender Eliminator Kit that seems to be used for KLX 250, so I decided to do it, but it was correct.
The part to be attached to the car body is made of Steel, and there is also a sense of security even in the Fender part, which is a fragile part transmitted with vibration.
The position of Kit, License Plate of this kind changes, the exhaust gas starts to hit and it hits, the License Plate becomes dirty from the back.
It may be safe to change the Screw of the License Plate to a slacky one.
View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.