커스텀 라이큰 속 뽑아 사양에 의한, 차량 전체를 세련되게 연출.
가죽 패턴은 기호에 맞게 선택하면, 4타입을 라인 업.
안전 기준에는 충분한 강도와 내구성을 겸비하는 ABS (강화 플라스틱) 를 채용.
시트 캐치를 표준 장비하고 있으므로, 잠금 장치 조작만 록 온 설계
모든 타입 약 20mm의 안코 제치고 사양으로 한다, 걸음 걸이성을 향상시킴과 동시에, 유려하고 세련된 폼을 연출.
■ 코다와리의 시트 포름
<<라이더부의 형상> >
프런트 섹션은, 순정과 비교하고 퓨얼 탱크를 덮도록 약 15mm전 방위로 늘림으로써, 퓨얼 탱크로 흐르는 라인을 강조하고 있습니다.
사이드 섹션은, 코너링 때나 니 그립시의 홀드감을 중시하고 퓨얼 탱크와 라인을 무너뜨리는 일 없는 샤프에 연출시키고 있습니다.
리어 섹션은, 장시간 주행시의 피로를 경감시키면서도, 가속시에는 견인을 확실히 나오는 플랫 마무리.
<<탠덤부의 형상> >
탠덤 라이더가 승차했을 때는 빼어난 홀드감을 실현시키며, 차량 전체의 스타일을 해치지 않고, 흐르는 듯한 폼에 의한 코리아 뷰를 자랑합니다.
[전용 안전 벨트부]
스타일리쉬 시트 컴플리트 베스트 피트 하는 조립 후 안전 벨트.
● Z2폼을 모티브로 부착 쇠 장식을 채용.
● 벨트 반격 고정 부분에는 전용 디자인의 단추 헤드 볼트를 채용.
● 벨트 반격 부분을 보호하고 벨트의 찍다 조각을 방지하는 가이드 플레이트를 채용.
● 장착 금구 고정 구멍-장착 금구 고정 구멍까지 전체 길이 약 410mm
The custom-like anchorless design gives a stylish look to the entire vehicle.
There are four types of leather patterns to choose from.
The seat base is made of ABS (reinforced plastic), which is strong and durable.
Equipped with a seat catch as standard, the lock-on design allows only locking operation.
All types are designed with approx. 20mm of anchoring to improve footing and create a sleek and stylish form.
■The particular seat form
<>
The front section is extended 15mm forward to cover the fuel tank compared to the stock section, to emphasize the line that flows to the fuel tank.
The side section is designed to be sharp without breaking the line with the fuel tank for a better holding feeling during cornering and knee grip.
The rear section has a flat finish to reduce fatigue over long periods of riding and to ensure traction under acceleration.
<>
The rear view is accentuated by the flowing form that does not spoil the overall style of the vehicle, while realizing an excellent holding feeling when a pillion rider is riding.
[W special seat belt]
Pre-assembled seat belts to best fit the Stylish Seat Complete.
●The mounting bracket is based on the Z2 form.
●Specially designed button head bolts are used to secure the belt roll back.
●A guide plate is provided to protect the belt's rewinding area and prevent the belt from sliding out.
●Total length from mounting bracket fixing hole to mounting bracket fixing hole: approx. 410mm