노멀보다 약 10mm앞으로 하기로 쾌적한 위치에 차종 전용 설계
핸들 전폭이 약 30mm 짧으며, 짠 각 2번 추가한 사양. 높이, 할인은 정상과 같습니다.
노멀 핸들 형상을 베이스로, 그립 부분이 평행 이동한 디자인. 각도는 정상과 동등하므로, 이미지를 해치지 않고, 양질의 라이딩 포지션을 형성할 수 있습니다.
● EFFEX차량 전용 오리지날 디자인 핸들
어드벤처와 쿠루 모델 등의 대형 글로벌 모델로 설정. 정상적 디자인을 기반으로 하며 순정 호스/케이블류가 닿는 범위 내에서, 양질인 라이딩 포지션을 실현시킨 오리지날 디자인 핸들.
● 케이블류 교환 불요
차종 전용 설계하므로, " 달아 보지 않으면 모르겠어;;" 같은 불안은 없습니다.
*차종에 따라서는, 최소한의 케이블류 잘 다루다 변경 등이 필요한 경우가 있습니다.
* "High" 에 대해서는, 케이블류의 교환이 필요한 경우가 있습니다.
● 스위치 구멍 가공 후
위치 결정이나 공구 준비 등, 번거로운 작업이나 쓸데없는 지출은 이제 필요 없습니다.
*차종에 따라서는, 스위치 구멍이 없는 경우가 있습니다.
●기 홀더를 좌우로 비키어 놓다
취부 직선을 약 5mm 길게 설계.
레버의 손잡이 위치를 미조정할 수 있습니다.
"차종 전용 볼트 온 핸들 바"
노멀에 대해서, 핸들 폭을 30mm 짧으며, 짜다 뿔을 2번 압축 설정으로 팔에 여유 있는 편안한 포지션입니다
Specially designed for models with a comfortable position by moving it forward about 10mm compared to the normal position.
The width of the steering wheel is shortened by about 30mm, and the angle of back sweep is added by 2°.The height and the pull are the same as stock.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models
Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables
It is designed for exclusive use of the model, so you don't have to worry about compatibility.
*Depending on the model, it may be necessary to change the minimum cable routing.
*For "High", it may be necessary to replace the cables.
●Switch hole machined
You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money.
*Some models may not have a switch hole.
●The lever holder can be shifted to the left or right
The mounting straight line is designed to be about 5mm longer.
The grip position of the lever can be fine-tuned.
Bolt-on handlebars for specific models
The width of the handlebar is shortened by 30mm and the angle of the aperture is narrowed by 2 degrees, so that the rider can enjoy a more relaxed position.