3년의 세월 당시의 형상을 완전 복귀. 엔진과 목도리와 틈이 거의 없는 동력에 달라붙었다처럼 예쁘게 붙는다. 차체와의 일체감이 매우 예쁩니다
알루미늄 플랜지는 사형 주조품에서 LEAD각인들. 이너 소음기도 사형 주조품에서 LEAD각인들. 그래서 오랜 세월 사용해도 질리지 않도록 사형의 재미 있는 정교한 조성이 되고 있습니다.
지금 현재 생산되고 있는 머플러 속에서도 최소 문자관입니다. 일반적으로 리어 쇼크 부착부까지의 길이지만, 리어 스텝까지 길이 밖에 없습니다.
사이즈이지만 에키파이의 굵기는 35φ에서 테일 파이프는 64φ입니다. 배기 가스가 나오는 구멍은 22φ입니다.
당시는 꼴이 흉함의 이미지 였지만 지금은 이 형태가 묘하게 당시 같은 맛이 있는 형태로 보입니다. 최대의 특징은 에키파이에서 뒤가 4피스의 부품이 용접되고 있는 점입니다. 일반적으로 요시무라 수곡게 모리 와키 수곡게관 등 일반적인 머플러는 에키파이에서 뒤가 3피스 구조입니다.
당연히, 쇼트관 때문에. 소리도 요시무라 관에 크게 때문에 차량 검사 대응품은 아니지만 형상에서는 상상도 할 수 없는 지금까지 들은 적이 없는 독특한 좋은 소리가 납니다. 이 소리에 누구나 한번 붙이면 고질이 됩니다. 옛날 이 소리에 짜릿한 지금도 여전히 당시 물건을 찾고 있는 분이 많은 것도 사실입니다.
머플러를 켠 채 오일 교환이 가능합니다. 오일 필터 교환 때는 탈착이 필요합니다.
머플러 교환에 필요한 마후라 개스킷 4장+설치 너트 8개자.
센터 스탠드가 사용 가능합니다. 단, 스톱퍼 (판자 스테이) 가 필요합니다.
업체는 LEAD·JAPAN제품입니다.
It took three years to completely reproduce the shape of the time.There is almost no gap between the engine and the exhaust, and the exhaust sticks to the engine.It has a very beautiful sense of unity with the vehicle body.
Aluminum flange is sand cast and LEAD stamped.The inner silencer is also sand cast and LEAD-stamped.Therefore, it is elaborately made with the taste of sand mold so that you will not get tired of using it for a long time.
This is the smallest short tube exhaust in production.Generally, the length is up to the rear shock attachment point, but the length is only up to the rear step.
The size of the exhaust pipe is 35Ф and the tail pipe is 64Ф.The exhaust gas outlet hole is Φ22.
At the time, it had an awkward image, but now this shape looks strangely like a tasteful shape of that time.The main feature is that the exhaust pipe is welded in 4 pieces.Generally, Yoshimura hand-bent pipe, Moriwaki hand-bent pipe, and other general exhausts have a 3-piece structure after the exhaust pipe.
Naturally, for a short tube.The sound is also louder than Yoshimura tube, and it has a unique sound that has never been heard before.This sound will make anyone addicted to it.It is a fact that there are many people who were attracted by this sound in the past and are still looking for the original one.
You can change the oil with the exhaust attached.When changing the oil filter, it is necessary to remove it.
Includes 4 exhaust gaskets + 8 mounting nuts required for exhaust replacement.
The center stand can be used.However, a stopper (board bracket) is required.
The manufacturer is LEAD JAPAN.