Matris프론트 포크 카트리지는 순정 카트리지에서 조정 범위를 확대, 스프링 환율도 변경 가능하게 함으로써, 서킷 주행에서 와인딩을 포함 가승리까지, 폭넓게 대응.
또, 리어 쇼크와 함께, 종합적인 세팅할 수 있도록 되어, 지금까지보다도 높은 차원의 라이딩이 가능하게 되었습니다. 구성 부품은 리어 쇼크와 마찬가지로 초듀릴루민 7075를 고정 밀로 머신 컷. 하드 알루마이트 처리함으로써 내구성을 향상시키고 있습니다.
■ 카트리지 키트 F12S
Matris카트리지 키트 F12S는, 도립/정립 프론트 포크용 이너 카트리지 키트입니다.
순정보다 카트리지 지름을 굵게 하다., 정상이 부족한 감소 폭을 대폭 업그레이드.
듀랄루민 7075산의 카트리지 실린더 (20mm) 는 고정 밀도 머신 컷 하고 표면을 하드 알루마이트 처리함으로써 내구성을 향상.
폰핑 로드 (12mm) 도 초듀릴루민제를 채용하는 하드웨어 알루마이트 사양.
차종에 의한, 전용 압력 측 조절 밸브를 채용, 순정의 조절 밸브보다 조정 범위가 넓고 미세 조정이 가능하게 됩니다.
톱 캡의 프리 로드 어저스터부에는 드러스트 베어링을 채용, 180° (0.5mm) 때마다 클릭감.
전용 컴프레션 밸브가 부속. (일부 모델에 컴프레션 밸브용 심이 부속)
·리바운드 (신장 쪽) , 컴프레션 (압측) 감쇠 조정 위치는 순정 프론트 포크에 준합니다.
카트리지 키트 F12R에는 전용 포크 오일이 부속 (SAE 7.5W)
카트리지 실린더 지름:20mm
카운터 스프링 표준 장비
Matris front fork cartridge has a wider adjustment range than the stock cartridge, and the spring rate can be changed to accommodate a wide range of driving conditions, from circuit driving to city driving, including winding roads.
In addition, the new shock absorber, together with the rear shock, allows for a more comprehensive setting and a higher level of riding performance than ever before.Components are made of 7075 super duralumin, machine-cut to high precision, as is the rear shock.Hard anodizing improves durability.
■Cartridge Kit F12S
Matris Cartridge Kit F12S is an inner cartridge kit for inverted and upright front forks.
The cartridge diameter is larger than stock to increase the damping range which is often lacking in stock.
The cartridge cylinder (20mm) made of duralumin 7075 is machine cut with high precision and hard anodized surface to improve durability.
The pumping rod (12mm) is also made of super duralumin and hard anodized.
Special pressure side adjustment valve is adopted depending on the type of vehicle, and the adjustment range is wider than stock adjustment valve, and fine adjustment is possible.
・Thrust bearings are used in the preload adjuster of the top cap, and a click can be felt every 180° (0.5mm).
・Comes with a special compression valve.(Shims for compression valves are included for some models)
・Rebound (extension side) and compression (compression side) damping adjustment positions are the same as stock front fork.
・Exclusive fork oil is included in Cartridge Kit F12R (SAE 7.5W equivalent)
・Cartridge cylinder diameter: 20mm
・Counter spring as standard equipment