기화기 리페어 키트
Product # D32-20-1003
46,077.78 KRW (5,174 엔)
List price: 46,077.78 KRW Save 0%
+52 Webike point (463.09 KRW)
이 상품은 생산이 중단되었습니다. |
Product # D32-20-1003
46,077.78 KRW (5,174 엔)
List price: 46,077.78 KRW Save 0%
+52 Webike point (463.09 KRW)
이 상품은 생산이 중단되었습니다. |
Model Page Links
Because Jet's Needle is obsolete OEM Product, it is convenient to exchange the old one with this Kit Needle. However, Float valve is slightly smaller than OEM Product (Length) Because it is different, I refrain from using it. It may be fine to use Float's liquid level adjustment properly.View Detail
As mentioned in other imprints, it doesn't go out setting, and it's also mentioned in the KDX thread on channel 2. In my case, I had symptoms of being too thin. What is the Repair kit? You shouldn't buy it, folks. Let's honestly ask for OEM. Our KawasakiView Detail
I bought it for the overhaul of the carburetor of my car LANZA, but because the diameter of Air Screw and Nozzle of Throttle stop screw is different from OEM Product, it becomes impossible to adjust the carburetor. The number is also different. Naturally, since air adjustment cannot be performed, the mixture ratio does not match and a plug is covered while Idling. It was the first phenomenon. When the iridium plum plug was observed, it was sticky with Gasoline. When the spark check was performed, the spark was lively and well sparked, so the plug was normal. If you compare the new part with the original OEM Product, the Screw's large size is the same but the Nozzle's large size and the number of peaks are different.
In the end, I put each Screw back to the original parts and it didn't get covered, but I didn't know the cause was new parts!
Please don't sell these parts as LANZA compliant, it will destroy your motorcycle.View Detail
I bought it for the overhaul of carburetor of my car LANZA, but the diameter of Air Screw and Nozzle of Throttle stop screw is different from OEM Product. Thanks to you, until I went to my friend's house, the plug was covered and became unpleasant.
In the end, I replaced the original OEM Product with the carburetor and the carburetor is back in shape, but please don't sell each of the key parts, each Screw, as LANZA compliant. Please.View Detail
XR250 (97) I opened the carburetor for the first time since I bought XR, but the contents were not good was OEM-only, so I was relieved to replace it
I did it carefully according to the manual and assembled and started Then, Idling is not stable
Once removed now, the Jet needle was subtly small & hellip; the air The Needle is kind of small, too, and it's a hellip;
What was the basis for creating it? By the way, there is no AICancellation, the exhaust system is also OEMView Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.