■ 슈퍼 헤드 4V+R (1감 4밸브)
인테크/엑저스트 밸브를 각 2개씩으로 밸브 커튼 면적을 확대하고 높은 흡배 마음 효율을 실현했습니다.
4밸브화에 따른, 센터 플러그화, 밸브 사이 모퉁이, 연소실 형상, 포트 형상의 밸런스를 도모하는 설계된 오리지널 헤드 형상 때문에 정상 헤드에서는 얻을 수 없는 고출력을 실현했습니다. 연소실은 NC가공에 의한 높은 정밀도에 완성하고 있습니다.
SOHC최고봉급 흡배 마음 효율
[밸브 지름] IN:25mm×2 / EX:21.5mm×2
밸브 스템 샤프트 지름:IN, EX함께 4.5mm
부등 피치 밸브 스프링을 채용하는 것으로 높은 회전 시 서어 징을 방지합니다.
실린더 헤드 앞면에는 블랙 도장을 시도하고 있습니다.
인스펙션 브리 자ー카바ー이 부속되어 있어서, 별도 오일 캐치 탱크 키트를 구입함으로써 엔진의 내 압력을 놓칠 수 있습니다.
인스펙션 브리 자ー카바ー, 인스펙션 커버는 알루미늄 깎는 미끼로 정교하게 가공되어 아름다운 크롬 도금을 시도하고 있습니다.
L. 실린더 헤드 사이드 커버는 알루미늄 다이 캐스트 제품 바렐 연마 마무리를 채용.
알루미늄 단조 롤러 로커 암
샤프트와의 마찰 저항을 저감하고 부드러운 동작을 구현!!출력을 최대한 끌어내다, 중고속 역에서의 출력 유지가 가능하다.
■ 샤프트/실린더/피스톤
오토 감압 샤프트
시동에 부담을 주지 않고 원활한 엔진 시동이 가능합니다.
올 알루미늄 세라믹 도금 실린더를 채용.
보아 지름:63mm스트로크:57.9mm (노멀)
세라믹 도금 실린더는 내구성, 기밀성, 방열성에 뛰어납니다.
실린더에는 오일 쿨러에 오일 꺼내다 입을 장비하고 있어서, 별도 오일 쿨러 키트를 구입함으로써, 기름 온도 상승을 억제합니다.
실린더 표면에는 블랙 도장을 시도하고 있습니다.
알루미늄 주조제 피스톤
압축비 12.5:1을 채용한 하이콤프 사양
고성능과 내구성을 추구한 피스톤.
피스톤 톱은 NC가공에 의한 높은 정밀도에 완성하고 있습니다.
■ 슈퍼 헤드 4V+R용 FI CON2 (인젝션 콘트롤러)
슈퍼 헤드 4V+R용에 맞춘 세팅된 3차원 보정 맵을 각종 내장하고 있어, 본체의 회전 개폐기만으로 세팅이 가능. 번거로운 PC접속 등은 필요 없습니다.
대용량 인젝터 부속.
내장 보정 맵을 전체적으로 짙은 눈, 얇은 눈에 본체의 회전 개폐기에서 미조정할 수 기능도 갖추고 있습니다. 레부 리미터 컷 기능도 갖추고 있습니다.
전용 하네스를 부속되어 있어서, 최소한의 배선 가공에서 장착이 가능합니다.
FI CON2는 GROM용으로 MSX125용 2종류가 있으며, 각 차량 전용품이 됩니다.
■ 슈퍼 헤드 4V+R콤보 키트 181cc
콤보 키트는 슈퍼 헤드 4V+R보아 업 키트 181cc엔진 부품에 적합한 연료 조정을 실시하는 FI CON2 (인젝션 콘트롤러) , 노멀 스로틀 바디용 혼합 분석기 어댑터 세트, 스파크 플러그가 부속되어 있습니다.
■Superhead 4V+R (1 cam 4 valves)
The intake/exhaust valves are each equipped with two valves to increase the valve curtain area and achieve high intake/exhaust efficiency.
The original head shape was designed to balance the center plug, valve pinching angle, combustion chamber shape, and port shape to achieve a higher output than the stock head.The combustion chamber is finished with high accuracy by NC machining.
The highest class of SOHC intake and exhaust efficiency
[Valve diameter] IN: 25mm x 2 / EX: 21.5mm x 2
Valve Stem Shaft Diameter: 4. 5mm for both IN and EX
The use of unequal pitch valve springs prevents surging at high RPM.
The cylinder head surface is painted black.
Since the inspection breather cover is included, you can release the internal pressure of the engine by purchasing the oil catch tank kit separately.
Inspection Breather Cover and Inspection Cover are machined from aluminum and plated with beautiful chrome.
L. Cylinder head side cover is made of die-cast aluminum with barrel polished finish.
Aluminum forged roller rocker arms
Reduced frictional resistance with camshafts for smooth operation! Maximizes power output and maintains it in the mid to high speed range.
■Camshafts/Cylinders/Pistons
auto decompression camshaft
It is possible to start the engine smoothly without putting a burden on the starter.
All aluminum ceramic plated cylinders.
Bore Diameter: 63mm Stroke: 57.9mm (Stock)
Ceramic plated cylinders have excellent durability, airtightness and heat dissipation.
Since the cylinder is equipped with an oil outlet to the oil cooler, the oil temperature rise can be suppressed by purchasing the oil cooler kit separately.
The surface of the cylinder is painted black.
Cast aluminum piston
Compression ratio 12.5: High comp specification with 1
Pistons designed for high performance and durability.
The piston top is NC machined for high precision.
■FI CON2 (Injection Controller) for Superhead 4V+R
Various 3D correction maps are pre-set for SuperHead 4V+R and can be set by simply using the rotary switch on the main unit.No complicated PC connection is required.
Large capacity injectors included.
The built-in correction map can be fine-tuned by using the rotary switch on the main unit to make the map darker or lighter overall.It also has a rev limiter cut function.
A special harness is included, so installation can be done with minimal wiring.
There are two types of FI CON2, one for GROM and the other for MSX125, and they are exclusive for each vehicle.
■Superhead 4V+R Combo Kit 181cc
The combo kit comes with FI CON2 (injection Controller), manifold adapter set for stock throttle body and spark plugs for fuel adjustment suitable for Superhead 4V+R Big Bore Kit 181cc engine parts.
■Successor part number: 01-05-0590