펜더리스 키트
Product # PFL354
100,366.56 KRW (11,270 엔)
List price: 100,366.56 KRW Save 0%
+113 Webike point (1,006.33 KRW)
이 상품은 생산이 중단되었습니다. |
Fitment
Open Fit Model Information TableProduct # PFL354
100,366.56 KRW (11,270 엔)
List price: 100,366.56 KRW Save 0%
+113 Webike point (1,006.33 KRW)
이 상품은 생산이 중단되었습니다. |
Fitment
Open Fit Model Information TableModel Page Links
Fits: YAMAHA MT-03 (2015-) 16-18, YAMAHA MT-25 16-21, YAMAHA YZF-R25 15-21, YAMAHA YZF-R3 15-18, YAMAHA
The method of installation was upgraded with animation, and it was useful Even I, who is super clumsy and poorly set up, can manage it in one hour The tool explained in the video is the best if you have it, but even the general tool was Large sturdyView Detail
Fits: YAMAHA MT-03 (2015-) 16-18, YAMAHA MT-25 16-21, YAMAHA YZF-R25 15-21, YAMAHA YZF-R3 15-18, YAMAHA
Postscript, how to do it wrong. When attaching the bottom lid, the line of Blinker and the line of License Plate Light do not overlap, but if it does not make it to line up in 3 rows beautifully, Quantity attached at the back of the bottom lid : 2pc Bolt does not arrive - - - I wrote that because I had not properly passed the Blinker line through the round hole of KitBody, it interfered with the lid. If you fix it, it does not interfere perfectly, even though it thinks well, it is built.View Detail
Fits: YAMAHA MT-03 (2015-) 16-18, YAMAHA MT-25 16-21, YAMAHA YZF-R25 15-21, YAMAHA YZF-R3 15-18, YAMAHA
Installation MOVIE is also open and easy to understand. Bolt to Body installing Lamps Quantity : It is good to have 2pc stuck together, because temporary tightening is easy, afterwards it is better to have a bottom lid properly, before this is made by another company Material of 13,000 yen : If you buy Plastic 's good thing, you can not afford License Plate Light by any means, and the line got out without a bottom lid, without the Reflector attachment board, and the gold was thrown that the return is also impossible. Then find PLOT's
In other words, when attaching the bottom lid, the Blinker line and the line of the License Plate Light do not overlap, but if it is not made in three rows beautifully, Quantity attached to the back of the bottom lid : Because Bolt of 2pc does not reach, it is about to adjust the slack of the line or to take a little care. It will be cool though the wire is clamped between the upper and lower plates, but it will not be disconnected at this order.
Quantity in front of the bottom lid : 2pc is thankful to Bolt for re-using the OEM's Bolt to tighten together with the lid, body and car body, so it is appreciated, even though Olm's Rear Fender is Bolt and Screw Too much !!
Until MODEL 2017 seems to have wrapped Blinker and License Plate Light lines carefully in the side of the ECU with Vinyl Cover, but from 2018 MODEL stopped Vinyl's Cover, it was changed into a gap, CostCut? If so, Manufacturer would like to be a Compact Rear Fender like PLOT from the beginning. Then, Mr. PLOT has made Rear Fender long to prevent water from being produced. You probably do not do itView Detail
Fits: YAMAHA MT-03 (2015-) 16-18, YAMAHA MT-25 16-21, YAMAHA YZF-R25 15-21, YAMAHA YZF-R3 15-18, YAMAHA
Item looks coo!l , fits perfectly even you can put your stock signal lights , license plates light and even the reflector back on . But one important thing people need to be noted . The license plate need to be drill or to be replace , because the holes are different and you can not just screw the license plate back on without making some modify . I will probably rank this item 9.5 / 10 . View Detail
Fits: YAMAHA MT-03 (2015-) 16-18, YAMAHA MT-25 16-21, YAMAHA YZF-R25 15-21, YAMAHA YZF-R3 15-18, YAMAHA
I installed it after watching the movie of installation work on YouTube in advance, so it was installed as Small one hour work as I did in the Instruction Manual.
I think that the work is Smooth if you arrange the proper fixtures as it is.
Accuracy is good though it is complicated shape, and consideration is made to hide Wiring as Well, it is difficult to enter water in Seat Cowl even in rainy season, and it is satisfying to have Refreshing appearance.
It is a good feeling to install as it is because Limit's clearance is between the License Plate top and the Fender Eliminator Kit, but the License Plate's Back plate (Other Company Product) It is the only regrettable thing that there was no Clearance enough to add.
Combined with Inner rear fender, the appearance is Refreshing and Well tightening impression.
I'd like to check on how far it will be affected in rainy weather.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
장바구니에 담기 전에 옵션을 선택하십시오.
일본
최대 쇼핑몰
전용 쿠폰,
세일
빠르고, 안정적인
배송
* 더 좋은 그리고 반드시 일본 부품을 찾을 수 있는 스토어.
* 지금 등록하기 면어메이징 딜 및 특가 제공!
* 800,000이상의 상품 목록. 부품 찾기가 어렵지 않습니다.
축하합니다! 고객님의 새 계정이 성공적으로 만들어졌습니다! 이제 회원 특권을 이용하여 온라인 쇼핑 경험이 가능합니다. 온라인 상점의 운영에 대해 궁금한 점이 있으면 Webike에게 이메일을 보내 주십시오.
제공된 이메일 주소로 확인 메시지가 전송되었습니다. 네가 만약 한 시간 내에 메일을 받지 못하면, 부탁드립니다 문의하기.