U-KANAYA제품은 전 GP라이더의 가나야 히데오 씨와 내 상사의 제휴에 의한 상품입니다. 당사의 관리 하에서 정밀 가공하고 있습니다.
U-KANAYA의 전 제품은, 일본 국내에서 전문 직원이 제품의 조립 및 검사를 하고 있으므로, 안심해서 사용하실 수 있습니다.
[투어링 타입 레버의 특징]
기존의 레버에 비해손잡이 부분을 완만한 곡면 형상하고 있으며, 기사에 편한 레버를 잡을 때 힘이 달아나기 어려운 형상으로 되어 있습니다.
들 힘의 손실이 적기 때문에 손과 손가락의 피로가 궁금한 롱 투어링 등 거리를 달리는 장면에도 최적입니다.
레버 디자인은 가공 부분을 줄이고 많은 효과를 거둘 수 있도록 차분한 분위기를 연출하고 있습니다.
어드저스트 기구 쯔마미 디자인을 변경하고, 기존 제품에 비해조작성이 개선되고 있습니다.
레버 끝 모양의 최적화에 의한 바 엔드에 접촉을 극도로 억제하다 구조에 끝냈지요.
[상품 설명]
높은 강도와 내식성이 뛰어난 6061알루미늄 합금을 쓰고 조악한 알루미늄 재료를 사용한 값싼 가죽 끈 레버의 차이는 일목 요 연합니다.
정밀한 풀 머시닝 가공에 의한 고급스러운 마무리가 되고 있습니다.
레버 8색 X어저스터 8색, 합계 64종류의 칼라 바리 에이션으로 애차의 커스텀 코디에 한몫 합니다.
순정의 레버와 교체하는 것만으로 간단히 장착 가능합니다. 차량에 따라서는 순정 부품을 유용합니다.
순정 레버와 비교해서 레버 위치가 앞에 와서 힘을 걸기 쉬운 형상이 됩니다. 손의 작은 편이나 순정 레버를 멀리 느끼고 있는 것에 특별히 권합니다.
찰칵 한 클릭감 좋은 원터치 어저스터에 의한 레버 위치를 인근에서 멀리까지 6단계에서 조정 가능. 레버 첨단 부분에서 약 30mm의 조정 폭이 있습니다.
레버의 길이는 약 177mm입니다. *아탓치멩토부는 포함하지 않아.
당사만의 독자적인 관리 시스템을 도입하고 있기 때문에, 만일의 사고에 의한 파손 부품의 부품 공급으로 신속히 대응 가능합니다.
보수 부품도 세세하게 설정되어 있으므로, 파손 부품 공급도 원활합니다.
상품은 예고 없이 가격 및 사양을 변경할 수 있으므로 양해 바랍니다.
순정의 클러치 레버 홀더 커버가 달린 차량의 경우, 일부 가공 또는 제거가 필요한 경우가 있습니다.
U-KANAYA products are made in collaboration with Hideo Kanaya, a former GP rider, and Uchi Shokai.Precision machining under our control.
All U-KANAYA products are assembled and inspected by our professional staff in Japan, so you can use them with confidence.
[Features of touring type lever]
Compared with conventional levers, the grip has a gentle curved surface that is easy to fit in the hand and prevents the force from escaping when the lever is gripped.
Because there is little loss of grip strength, it is also ideal for long distance touring and other situations where hand and finger fatigue is a concern.
The lever design has been designed to reduce the number of machined parts and to create a calm atmosphere that will be accepted by many users.
The knob design of the adjusting mechanism has been changed to improve operability compared with the conventional product.
The lever end shape has been optimized to minimize contact with the bar end.
[Product Description]
Made of 6061 aluminum alloy with high strength and excellent corrosion resistance.The difference from cheap billet levers made of inferior aluminum is obvious.
The precision full machining process gives it a high quality finish.
With 8 colors of levers and 8 colors of adjusters, 64 colors in total, it will help you coordinate your bike's customization.
It can be easily installed by simply replacing the stock lever.Depending on the model, stock parts may be used.
Compared to the stock lever, the lever is positioned closer to the front, making it easier to apply force.It is especially recommended for those with small hands or those who feel the stock lever is too far away.
The lever position can be adjusted in 6 steps from near to far by the one-touch adjuster with a good click feeling.There is an adjustment range of about 30mm at the end of the lever.
The length of the lever is about 177mm. *Attachment part is not included.
With the original management system, quick supply of the parts is available when you had an accident.
Repair parts are also set up in detail, so the supply of damaged parts is smooth.
Please note that prices and specifications are subject to change without notice.
If your vehicle is equipped with a stock clutch lever holder cover, it may be necessary to modify or remove some parts.