풀세트
[칼라]
블랙
[재료]
알루미늄/양은 표면 처리
[사양]
스위치 구멍 가공 후
스로틀부 경면 가공
[상품 내용]
·핸들바 본체
스로틀 홀더
스로틀 케이블
브레이크 호스 (스탠 메시)
·클러치 호스 (스탠 메시)
·밴조 볼트
호스용 크래시 와셔
[부속품 상세]
스로틀 세트 X1 (도우카티 순정 65420292A)
스로틀 와이어 X1 (도우카티 순정 65621001A)
<브레이크 호스>
·그물 호스 길이:835mmX1
·밴조 어댑터 90도 블랙스 텐 X1
·밴조 어댑터 20번 블랙스 텐 X1
싱글 밴조 볼트 블랙스 텐 X1
<클러치 호스>
·그물 호스 길이:1310mmX1
·밴조 어댑터 90도 블랙스 텐 X1
·밴조 어댑터 20번 블랙스 텐 X1
·크랏슈 와셔 X8
[포지션 데이터]
노멀보다 포지션
높이:70mm업
전폭:+30mm
압축:65mm앞
이 핸들은, 단체에서는 장착할 수 없습니다.
*교환하려면, 스로틀 홀더, 스로틀 케이블, 클러치 호스, 브레이크 호스 교환이 필요합니다.
*스로틀 케이블을 교환할 때는 인젝터 보디까지 접근할 필요가 있습니다. 교환에는 전문적 지식이 필요하오니, 딜러 등 전문 지식을 가진 판매점에 맡기는 것을 추천합니다.
*스로틀 케이블 교체의 업체 교환 표준 시간은 2.5시간입니다. 또, 브레이크 호스를 교환할 때는 ABS유니트로부터 호스를 떼어 낼 필요가 있어, 호스 구내 배차 후는 유체의 에어 빼는 것이 필요합니다. 또, 클러치 호스 교환에도 유체의 에어 빼는 작업이 필요합니다. 교환 전에는 유체를 준비할 필요가 있기 때문에 주의하십시오.
*스로틀 케이블이나 호스 교환은 잘 못하면 성능을 훼손시키고 충분히 기능을 하지 않은 경우가 있으므로 교환에는 충분히 주의하세요. 교환은 전문 지식을 가진 딜러 등에 의뢰하는 것을 추천 드립니다.
Full Set
[Color]
Black
[Material]
Aluminum / anodized surface treatment
[Specification]
・Switch hole pre-machined
・Mirror finish on throttle part
[Product Description]
・Handlebar unit
・Throttle holder
・Throttle cable
・Brake Hose (Stainless Mesh)
・Clutch hose (Stainless mesh)
・Banjo Bolt
・Crush washers for hoses
[Components Detail]
・Throttle set x 1 (Stock DUCATI 65420292A)
・Throttle wire x 1 (Stock DUCATI 65621001A)
・Mesh hose Length: 835mm x 1
・Banjo Adapter 90° Black Stainless x 1
・Banjo Adapter 20° Black Stainless x 1
・Single Banjo Bolt Black Stainless x 1
・Mesh hose length: 1310mm x 1
・Banjo Adapter 90° Black Stainless x 1
・Banjo Adapter 20° Black Stainless x 1
・Crush Washer x 8
[position data]
Stock ratio position
Height: 70mm up
Full width: +30mm
Aperture: 65mm forward
*This handlebar cannot be installed by itself.
*Replacing the throttle holder, throttle cable, clutch hose and brake hose are required for replacing it.
*When replacing the throttle cable, it is necessary to access the injector body.It is recommended that you entrust the replacement to a dealer who has expertise in this field.
*The manufacturer's standard replacement time for a throttle cable replacement is 2.5 hours.Also, when replacing the brake hose, it is necessary to remove the hose from the ABS unit, and after replacing the hose, it is necessary to bleed the fluid.It is also necessary to bleed the fluid when replacing the clutch hose.Please note that you will need to prepare the fluid before replacement.
*If you make a mistake in replacing the throttle cable or hose, the performance may be damaged and it may not be able to function properly, so please be very careful when replacing them.It is recommended that you entrust the replacement to a dealer who has expertise in this field.