[키트 내용]
알루미늄 스로틀 홀더
드로틀 관
로드 조정 그립
스탠더드 릴 4사이즈 (35/40/45/50mm)
프로그레시브 캠 릴
일본어 취급 설명서
*진정한 스로틀 바디를 사용하고, 순정의 릴 사이즈가 33.4mm의 경우. 이 모델의 순정 스로틀 아펠슈 쓴풀은, 온/오프 스위치, 모드 스위치, 시동 버튼을 탑재하고 있습니다. 모션 프로의 악세사리 스위치 (YM11-0098) 는 모드 스위치를 갖추지 않았기 때문에, 순정 스로틀 아펠슈 쓴풀과 교환하고 사용할 수 없습니다.
*Rev2킷트를 장착하고, 필요한 모든 스위치 기능을 갖추기 위해서, 이 모델은 정품보다 긴 애프터 파트의 핸들 바 (적어도 순수 핸들바보다 오른쪽에 50mm 길다.) 가 필요합니다. 그리고 Rev2스로틀 하우징의 안쪽에 순정의 스로틀 아펠슈 쓴풀을 장착하세요.
*Rev2키트는, 모델별로 전용 설계의 케이블이 부속되어 있지만, Rev2스로틀 자체는 모델 전용 설계에서는 없습니다. 그래서, 있는 상황에서, Rev2키트는 순정의 한정된 공간이 원인으로 직접 볼트 온에서 장착할 수 없는 경우가 있습니다.
*장착 방법에 따라서는, Rev2스로틀 튜브와 그립 장착에는 핸들바가 짧을 경우, 다른 제어 부품을 이동하거나 핸들 바를 애프터 파트의 긴 것으로 교환하는 등의 작업이 필요합니다.
*단 오토바이를 가장 좋은 방법을 결정하고, Rev2킷이 안전한 조작을 위한 올바른 틈을 갖고 적절히 장착되어 있음을 확인할 것은 고객의 자기 책임이 됩니다.
*제품의 장착은 유자격 정비사가 실시하고, 적절한 기능을 신중히 확인할 필요가 있습니다.
*경고:부적절한 설치는 중대한 부상이나 사망으로 이어질 우려가 있습니다.
[Kit Contents]
Aluminum Throttle Holder
Throttle Tube
road control grip (tennis)
4 sizes of standard reels (35 / 40 / 45 / 50mm)
progressive cam reel
Japanese instruction manual
*In case the stock throttle body is used and the stock reel size is 33.4mm.The stock throttle assembly for this model includes an on / off switch, mode switch, and starter button.The Motion Pro accessory switch (YM11-0098) does not have a mode switch and cannot be used interchangeably with the stock throttle assembly.
*This model requires a longer-than-stock aftermarket handlebar (at least 50mm longer on the right side than the stock handlebar) in order to fit the Rev2 kit and have all the necessary switch functions.Then install the stock throttle assembly inside the Rev2 throttle housing.
*The Rev2 kit comes with a cable specifically designed for each model, but the Rev2 throttle itself is not model specific.Therefore, under certain circumstances, the Rev2 kit may not be a direct bolt-on due to the limited stock space.
*Depending on the installation method, if the handlebar is too short for the Rev2 throttle tube and grips, other control components may need to be moved or the handlebar replaced with a longer aftermarket one.
*It is your responsibility to determine the best method for your motorcycle and to ensure that the Rev2 kit is properly installed with the correct clearances for safe operation.
*The installation of the product must be carried out by a qualified mechanic, who must carefully check for proper functioning.
*Warning: Improper installation can result in serious injury or death.