경량액 강성, 트리플 스퀘어 스윙 암입니다.
스윙 암의 재질에는 알루미늄 7N01자재를 사용하여, 순정 스윙 암 4.8kg에 대해서 2.2kg와 경량적이고 강성에 마무리하고 있으며, 바네하 중량 경량화에 의한 오토바이의 조작성을 향상시킵니다.
트리플 스퀘어 파이프는, G크래프트사에서도 절대적인 인기를 자랑하는 파이프에서, 이형째의 글씨 단면 구조에 의한, 경량적이고 강성을 갖고 있습니다.
[스윙 암 마무리]
블랙 알루마이트 가공 (G크래프트 품번:60198)
·세라 코트 마무리 (G크래프트 품번:60807)
[세라 코트는?]
세라 코트는 NIC사제 페인트로, 현재 미국 군 부대에 사용되는, 특수한 인화 도장, 상온 도장입니다.
가혹한 조건에 대응할 수 있도록 검사되어 내열, 내마모 내구성, 내 것이 좋았고 방열, 단열 등 성능 위주로 연구 제작된 도료입니다.
세라믹 특수 기계에 의한 분쇄하고, 도료에 혼입시키고 도막의 강도를 향상시키고 있습니다. 그래서 배의 표피 모양의 표면에 되지만, 도막이 매우 얇은 수 있습니다 (25마이크론)
용접 자국 (비드) 숨지 않고 남겨둘 수 있습니다.
밀착성은 코팅 재료 중에서도 최고치에서, 쭈그리고도 주름이 잡히지 않고 징검다리에서도 페인트가 벗겨지기 어렵기 때문에, 프레임, 스윙 팔에 적합한 표면 처리 되어 있습니다.
*통상 납기+3-5주일 정돕니다.
[옵션 1] 차고 조절 서비스 받은 사양 (G크래프트 품번:60057)
링크 리스 타입의 스윙 팔에 상하 7.5mm의 조정 폭을 가질 수 있어요.
[옵션 2] 피벗부 베어링사 (G크래프트 품번:60006)
표준은 부시의 피벗부를 베어링에 변경합니다.
내구성 향상과 원만한 동작 특성을 실현하고 있습니다.
[옵션 3-1] 체인 끌가공
OW타이프 체인 끌가공 (G크래프트 품번:60014)
트리플 스퀘어 타입 전용 옵션입니다.
테이퍼 가공된 칸이 움직이니 상하의 차이가 없어집니다.
체인 끌코마 먹을수록 탐내는 일 타입 (G크래프트 품번:60221)
체인 조정 시 정비의 번거로움을 해소하기 위해서 고안된 먹을수록 탐내는 일 타입 조정자입니다.
스윙 암 최후부에 어드저스트 넛이 오기 때문에, 공구와 간섭 등으로 돌리기 힘들었던 어드저스트부의 조정이 쉽게 됩니다.
[옵션 3-2] 스탠드 훅 베이스 추가 가공
스탠드 훅 베이스 (M6) 추가 가공 (G크래프트 품번:60903)
G크래프트제 스탠드 훅, 또는 사외제 스탠드 훅 (M6) 를 장착할 수 있습니다.
레이싱 스탠드 훅 사양 (G크래프트 품번:60186)
트리플 스퀘어 체인 연결 (표준) 를 경주용 스탠드 훅 사양에 변경합니다.
레이싱 스탠드 훅 사양 (OW형) (G크래프트 품번:60188)
트리플 스퀘어 체인 끌OW타이프를 경주용 스탠드 훅 사양에 변경합니다.
[옵션 4] 체인 슬라이더 볼트 멈추고 사양 (G크래프트 품번:60228)
체인 슬라이더를 리벳 끝에서 볼트 통제에 변경합니다. 마모된 경우의 교환이 쉽게 합니다.
[옵션 5] 펜더 스테이 추가 가공 (G크래프트 품번:60808)
순정 리어 펜더가 탑재되도록 스테이를 추가합니다.
스테이는 볼트 통제 때문에, 뗄 수 있습니다.
Light weight, high rigidity, triple square swingarm.
The swingarm is made of aluminum 7N01 material and it weighs 2.2kg compared to stock swingarm 4.8kg.
The triple square pipe is one of the most popular pipes in G-Craft, and has a light weight and high rigidity due to its different shaped cross section.
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Suspension support for dampers (G-Craft part number: 60057)
The Linkless Swingarm can be adjusted up or down by 7.5mm.
[Option 2-1] Chain pull processing
OW type chain pulling process (G-Craft Part number: 60014)
This option is only for Triple Square Type.
The tapered frame moves to eliminate vertical misalignment.
Chain pull frame Rear pull type (G-Craft part number: 60221)
These adjusters are designed to eliminate the need for maintenance when adjusting the chain.
Since the adjusting nut is located at the last part of swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference with tools.
[Option 2-2] Additional processing of stand hook base
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
Racing stand hook specification (G-Craft part number: 60186)
The triple square chain pull (standard) is changed to the racing stand hook specification.
Racing stand hook specification (OW type) (G-Craft part number: 60188)
Triple square chain pull OW type will be changed to racing stand hook specification.
[Option 3] Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 4] Additional fender bracket (G-Craft part number: 60808)
Add a bracket so that the stock rear fender can be installed.
The bracket is bolted and can be removed.