[특징]
공랭 엔진·아우타ー심용 (트윈 캠 모델) 밸브 클리어런스 조정용 툴입니다.
밸브 스프링을 억제, 정산용 심을 교환 할 수 있습니다.
[사양]
카와사키 차 발브심 공구
[사용 순서]
1, 태핏 간극을 시크니스 게이지 확인하다
2, 크랭크를 돌리고, 조정 개소의 밸브를 이륙시키다
3, 전용 공구의 플레이트를 컴 홀더 측벽에서 비뚤어지 멈추며 태핏 본체의 끝을 걸다.
4, 회전을 천천히 되돌리고 태핏에 쇠 장식을 걸친 채로 한다. 이로 틈새가 커지다
5, 시 무 뽑기 툴의 첨단을 아우타ー심 밑에 넣고 심을 들고 뽑다
6, 규정 태핏 클리어런스에 되는 심을 넣고 재확인하다
[Features]
Bulb clearance adjustment tool for air-cooled engines and outer shims (twin cam models).
Valve springs can be suppressed and shims for adjustment can be replaced.
[Specification]
Bulb shimming tool for Kawasaki bikes
[Instructions for use]
1. Check the tappet clearance with a sickness gauge.
2. Turn the crank to lift the valve at the adjustment point.
3, Hook the plate of the special tool to the edge of the tappet body while stopping displacement by the cam holder side wall.
4, Slowly return the crank rotation and leave the fittings hooked to the tappet.This will increase the gap.
5. Insert the tip of the shim removal tool under the outer shim and lift outer shim.
6, Shim to the specified tappet clearance and recheck.