환원 파이프에 대응하고 있습니다.
기존의 에어 크리너 키트보다도 더 저가격으로 간편하게 파워 필터화할 수 있는 지금까지 없었던 키트입니다.
몸은 플라스틱에서 크롬 도금을 하고 있습니다. 인테크 부분은 스테인리스 버프 연마에서, 장착 스테이에는 강도가 강한 12mm지름의 스테인리스 환봉을 도입하여 여러 차례의 테스트를 거듭한 완성시키고 있기 때문에, 강도, 내구성은 좋습니다.
노멀 에어 크리너에서, 간단히 볼트 온에서 변화할 수 있습니다.로 다운 차량에도 대응하겠습니다.
클리너에는 파워 필터가 장비되어 있습니다. 종래는 파워 필터에 맞추어, 기화기의 세팅을 하지 않으면 안 되었지만 이 상품은 필요 흡기량에 맞추어 일정 범위 내에서 아예 단계로 조정 가능하므로, 기화기를 떼어 내거나 하는 작업이 필요 없습니다. 환원 파이프 대응이라는 것도 있고, 쉽게 세팅하기 쉬우며, 파워 업이 측정할 수 있습니다.
화상 (1) , (2) 는, 브리즈 타입 에어 클리너 키트의 내부에서, (1) 는 에어의 양을 최소화한 상태. (2) 는 에어의 양을 최대한으로 한 상태입니다. 정상 머플러, 우일 즈윈제 목도리를 붙인 경우의 에어의 양은, 최소한에서, 15mm에서 25mm 올린 범위에서, 베스트 차림이 찾아냅니다.
It is compatible with reduction pipes.
This kit is an unprecedented kit that allows you to easily convert to a power filter at a lower price than the conventional air cleaner kit.
The body is made of plastic and is chrome plated.The intake part is made of stainless steel with a buffed finish, and a strong 12mm stainless steel round bar is used for the mounting bracket and they have been tested many times for the production completion, so the strength and durability are perfect.
Easy bolt-on replacement for the stock air cleaner.Also available for lowered vehicles.
The cleaner is equipped with a power filter.Conventionally, the carburetor had to be set according to the power filter, but this product can be adjusted fully within a certain range according to the required intake air volume, and you don't need to detach the carburetor.Since it is compatible with the reduction pipe, it is easy to set up and to measure the power up.
Images (1) and (2) show the inside of the breeze type air cleaner kit, and (1) shows the condition with the minimum amount of air.(2) is the state in which the air volume is maximized.If you have a stock exhaust or a WirusWin exhaust, you can find the best setting by extending the amount of air from the minimum to 15mm to 25mm.