[세트 내용]
오프셋 스프로킷 15mm X1개월
피키싱그프레ー토 X1개월
SCM캡 볼트 M6X10 X2달
*발전기 커버와 스프로킷 볼트가 간섭합니다. 그래서 커버 뒷면을 깎는 가공이 필요합니다.
*특히 17자루를 사용하는 경우는 케이스 뒤의 하부가 간섭하는 커버를 깎을 필요가 있습니다.
*오프셋 스프로킷느라 무리한 힘이 더 걸립니다. 그래서 동력을 고려한 후로 본 제품의 사용을 검토 바랍니다.
*15mm와이드 스페이서의 경우, 노멀 폭 스윙 암에는 설치할 수 없습니다. 와이드 스윙 암 등의 장착이 필요합니다. 또 플라이 휠 커버의 가공 또는 사외 제품 교환 등이 필요합니다.
[Set components]
Offset sprocket 15mm x 1 pc.
Fixing plate x 1 pc.
SCM cap bolt M6 x 10 x 2 pcs.
*Generator cover and sprocket bolts interfere with each other.Therefore, it is necessary to shave the back surface of the cover.
*In particular, if you are using a 17T case, the underside of the case backside will interfere, so the cover will need to be shaved off.
*The offset sprockets apply more undue force.Therefore, please consider the use of this product in consideration of engine power.
*15mm wide spacers cannot be installed on stock width swing arms.A Wide swingarm must be installed.Also, the flywheel cover needs to be modified or replaced with an external product.