·Fuel control for each individual cylinder in a smaller enclosure
·"Warm-up"fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading)
·Reduced size from the PCIII USB
·Easy to install
·USB powered from computer;9 volt adapter is no longer needed
·Two-position map-switching function built in
·Can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
·Gear/speed input allows for map adjustment based on gear
·Analog input allows user to install any 0-5 volt sensor
·Build an adjustment table based on analog input such as boost or temperature
·Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
·More tuning ranges than PCIII USB
·Enhanced"accel pump"utility
·For Offroad and ATV, see appropriate catalog under Moose Power Commanders
·Made in the USA
SECONDARY FUEL MODULE
·Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
·If gear position input is connected to your PCV, you can adjust all of the injectors on a"per gear"basis
·Allows for the adjustment of all eight-injectors
·See application chart for availability
·Single cable connection to the PCV
·Connects to the upper injector rail using OEM connectors
·You can also map each injector separately, giving you up to 48 complete maps
·The"basic"mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
·Adjust both upper and lower injectors by as much as+250/-100%
·The"basic"mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
·The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
·Once the sensor is attached you will have full Quick Shifter functionality
·The QEM connects to the upper injectors and then into the PCV
[참고 번역]
· 작은 인클로저 내 각각의 실린더별 연료 제어
・ "워밍업" 연료 조절 (엔진의 온도를 읽고 판독치에 기초해서 연료/타이밍 조절이 가능한 유닛)
·PCIII USB의 크기를 줄인다
·설치가 간단하다
컴퓨터로부터 공급되는 USB;9볼트 어댑터는 이제 필요하지 않다
·2포지션 맵 전환 기능 내장
싱글 폴 싱글 핸드 (SPST) 스위치를 추가하여 2개의 다른 연료 맵을 바꿀 수 있습니다
기어/속도 압력에 의한, 기어에 근거한 맵 조정이 가능
·아날로그 입력을 사용하면 0-5V의 센서를 부착할 수 있습니다
·부스터 또는 온도 등의 아날로그 입력에 근거하고 조정 테이블을 작성한다
파워 커맨더 V는 각 실린더를 개별적으로 지도할 수 있습니다.
·PCIII USB보다 많은 튜닝 레인지
·강화된 "가속 펌프" 유틸리티
·Offroad와 ATV에 대해서는 Moose Power Commanders의 적절한 카탈로그를 참조하세요.
아메리카산
이차 연료 모듈
·추가 연료 제어와 시프터 기능을 제공하는 8개의 인젝터 오토바이에 Dynojet퀵 시프터 센서를 사용할 수 있습니다
기어 위치 입력이 PCV에 연결되어 있는 경우에는 모두 주입기를 "기어 단위" 그래서 조정할 수 있습니다
전 8주입기의 조정이 가능
이용 가능한 어플리케이션 차트를 참조
·PCV로의 단일 케이블 접속
·OEM커넥터를 사용하고 상부 주입기 레일에 접속합니다
·각 주입기를 따로 맵 하고, 최대 48개의 맵을 완성시킬 수도 있습니다
・ "기본" 모드에서는, 요구된 연료 변경을 상부와 하부 양쪽의 주입기 모듈에 동시에 투입한 단일 연료 테이블을 준비할 수 있습니다
·상하 주입기를+250 / -100%
・ "기본" 모드는 4개의 주입기보다 많은 연료를 필요로 하지만, 각 실린더와 각 기어를 따로 매핑 하는 복잡성을 필요로 하지 않는, 변경된 엔진의 완벽한 설정이다
QUICK SHIFTER EXPANSION MODULE
·QEM, Dynojet퀵 시프터 센서를, 8개 인젝터를 갖춘 모터 사이클에서 Power Commander V와 병용할 수 있습니다
센서가 장착되면, Quick Shifter의 풀 기능을 사용할 수 있습니다
·QEM은 상부 주입기에 접속하고, 다음에 PCV에 접속합니다
・Fuel control for each individual cylinder in a smaller enclosure
・Warm-up" fuel adjustment (unit reads engine temp and allows fuel / timing adjustments based on the reading)
・Reduced size from the PCIII USB
・Easy to install
・USB powered from computer; 9 volt adapter is no longer needed
・Two-position map-switching function built in
・It can add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps
・Gear / speed input allows for map adjustment based on gear
・Analog input allows user to install any 0-5 volt sensor
・Build an adjustment table based on analog input such as boost or temperature
・Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position input connected
・More tuning ranges than PCIII USB
・Enhanced “accel pump" utility
・For Offroad and ATV, see appropriate catalog under Moose Power Commanders
・Made in the U.S.A.
SECONDARY FUEL MODULE
・Allows for the use of the Dynojet Quick Shifter sensor on eight-injector bikes which provides added fuel control and shifter functionality
・If gear position input is connected to your PCV, you can adjust all of the injectors on a “per gear" basis
・Allows for the adjustment of all eight-injectors
・See application chart for availability
・Single cable connection to the PCV
・Connects to the upper injector rail using OEM connectors
・You can also map each injector separately, giving you up to 48 complete maps
・The “basic" mode allows you to have a single fuel table that simply puts the requested fuel change in both upper and lower injector modules at the same time
・Adjust both upper and lower injectors by as much as +250 / -100%
・The “basic" mode is the perfect setting for modified engines that require more fuel than four-injectors can provide, but do not need the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet Quick Shifter sensor to be used with Power Commander V on bikes that have eight injectors
・Once the sensor is attached you will have full Quick Shifter functionality
・The QEM connects to the upper injectors and then into the PCV
[Translation]
・Fuel control for each individual cylinder in a small enclosure
・Warm-up fuel adjustment (a unit that reads engine temperature and allows fuel / timing adjustments based on the reading)
・Size reduction from PCIII USB
・Easy to install
・USB supplied from computer; 9 volt adapter is no longer needed
・Built-in 2-position map switching function
・Single Pole Single Throw (SPST) switch is added to switch between two different fuel maps
・Gear / speed input enables gear-based map adjustment
・Using analog inputs, 0-5V sensors can be installed
・Create an adjustment table based on analog inputs such as boost or temperature
・The Power Commander V can map each cylinder individually.
・More tuning range than PCIII USB
・Enhanced "acceleration pump" utility
・For Offroad and ATV, please refer to the appropriate Moose Power Commanders catalog.
・Made in USA
Secondary Fuel Module
・Dynojet Quick Shifter Sensor can be used on 8 injector bikes to provide additional fuel control and shifter function
・If the gear position input is connected to the PCV, all injectors can be adjusted in "gear units"
・All 8 injectors can be adjusted
・See the available application charts
・Single cable connection to PCV
・Connect to the upper injector rail using the OEM connector
・Each injector can be mapped separately to complete a map of up to 48 injectors
・In the "Basic" mode, a single fuel table can be prepared that will feed the requested fuel change to both the upper and lower injector modules simultaneously
・Up / Down Injector + 250 / -100
・The "basic" mode is the perfect setting for a modified engine that requires more fuel than four injectors, but does not require the complexity of mapping each cylinder and each gear separately
QUICK SHIFTER EXPANSION MODULE
・The QEM allows the Dynojet quickshifter sensor to be used with the Power Commander V on motorcycles with eight injectors
・Once the sensor is installed, the full functionality of the Quick Shifter can be used
・QEM is connected to the upper injector, and then to the PCV