균형 있게 쾌적하게!
순정의 핸들 위치보다, 약 7mm앞/위.
노멀보다 약 10mm앞으로 하기로 쾌적한 위치에.
차종 전용 볼트 온 설계. 간단히 장착합니다.
최소로 최대의 효과
노멀의 균형을 무너뜨리지 않게, 아주 잠깐만, 당신의 체격에 맞추어 줄게
그런 발상에서 탄생한 것이 EZ-FIT BAR (이지 피팅 바) 입니다. 장착의 간단함에도 구애 받고 있습니다.
저스트 피트 쉽게, 안전하게
손목과 팔의 각도도, 상체의 힘의 기울기 사정도 머리의 위치도 핸들는 대로
이것이 당신의 체격에 꼭 낀다면 편하게 뜻대로 움직일 수 있는, 집중력도 오래갑니다. 결과적으로 안전성도 높아집니다.
에후에쯔크스·이지 피팅 바는 노멀의 핸들 형상을 바탕으로 그립 부분을 평행 이동.
밸런스의 좋은 점을 유지하면서, 라이더의 "좀 더" 에 부합되는 최적 위치를 추구했습니다.
■ 케이블류 교환 불요
노멀의 브레이크와 클러치 호스 (케이블) , 스로틀 케이블, 배선류를 그대로 사용할 수 있습니다.
극히 일부 High타입은 요(요)교환입니다만, 무엇을 무엇 mm 길게 하면 좋을지를 명기하고 있습니다.
■ 구멍을 뚫고 가공 후
스위치 박스를 도는 제지가 들어가는 구멍을 가공 후.
위치 결정이나 드릴 가공과 같은 귀찮은 작업은 필요 없습니다.
Balanced and comfortable!
About 7mm in front of / above the stock handle position.
By moving it forward 10mm compared to the normal position, the position is more comfortable.
Bolt-on design for vehicle models.Easy to install.
Minimum and maximum effect
I'll adapt it to your physique just a little bit, so as not to upset the stock balance.
The EZ-FIT BAR was born from this idea.It is also easy to install.
just right fit, effortlessly and safely
The angle of your wrists and arms, the tilt of your upper body, and the position of your head all depend on the steering wheel.
If this fits your physique, you can easily control it as you wish and your concentration will last longer.As a result, safety is increased.
The Efex Easy Fit Bar is based on the normal handlebar shape, but the grip section has been moved parallel.
While maintaining a good balance, the optimal position is pursued to respond to the rider's a little more".
■No need to replace cables
The stock brake and clutch hoses (cables), throttle cables and wiring can be used without modification.
Some High types need to be replaced, but we have specified what should be lengthened by how many mm.
■Pre-drilled holes
A hole has been drilled in the switch box to accommodate the stopper.
No troublesome work such as positioning and drilling is required.