The panel / cylindrical air filter is commonly referred to as"replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).
Grafico prestazioni
Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C°-Humidity 25%-Pressure 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a"Full Moulding"system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
[참고 번역]
패널/원통형 에어 필터는, 일반적으로 "교환용 에어 필터" 라고 부릅니다. 그것은 OEM에어 필터를 교환하기 위해서 차량의 전 에어 박스에 설치되고 있습니다. 이는, 보다 효율적인 여과와 조합해서 공기 유량을 늘릴 수 있는 고성능 재료로 만들었고, 7미크론 (OEM의 10마이크론과 비교하고) 에서 모든 불순물의 봉쇄를 보증하고 있습니다.
Grafico prestazioni
OEM종이 필터에 대한 표본 BMC에어 필터의 에어 플로 차트
온도 25번-습도 25%압력 1020mbar
시험은 oem공기 박스와 관련된 공기의 흐름의 수축으로 달렸다.
이 차트는 순수한 설명 목적이며, 현재의 필터를 참조하지 않습니다.
BMC에어 필터는 " 풀 몰딩" 시스템을 사용하고 제조되고 있습니다. 이 시스템에 의한, 용접된 접합부가 없는 단일의 금형에서 특징적인 빨간 색 필터를 실현하고 쉽게 파손될 회피됩니다. BMC공기 여과 시스템에서 사용되는 고무는, 장수명]이며, 매우 내구성이 있고 모든 형상의 에어 박스에 최적인 접착 특성을 갖추고 있습니다.
BMC필터는, 저습도의 기름을 에폭시 코트된 합금 메시로 감싼 다층 면 거즈로 만들고, 가솔린 연기로부터 보호와 공기 습도에 의한 산화를 확실히 합니다.
모든 BMC에어 필터는 사전에 주유됐고, 적절한 BMC재생 킷을 사용하고 깨끗하게 재생할 수 있습니다.
The panel / cylindrical air filter is commonly referred to as ”replacement air filter”. It is installed in the vehicle’s original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM’s 10 microns).
Grafico prestazioni
Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C° - Humidity 25% - Pressure 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.
BMC air filters are produced using a ”Full Moulding” system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
[Translation]
Panel / cylindrical air filters are commonly referred to as "replacement air filters".It is attached to the vehicle's original air box to replace the OEM air filter.It is made of a high performance material that allows increased air flow combined with more efficient filtration and guarantees containment of all impurities from 7 microns (compared to the OEM's 10 microns).
Grafico prestazioni
Air flow chart of sample BMC air filter against OEM paper filter
Temperature 25°C - Humidity 25% - Pressure 1020mbar
The test ran on a contraction of the airflow associated with oem airboxes.
This chart is purely for illustrative purposes and does not refer to the current filter.
BMC air filters are manufactured using a "full moulding" system.This system allows the realization of a characteristic red filter from a single mold without welded joints and avoids easy breakage. The rubber used in the BMC air filtration system is long-lasting and extremely durable, with adhesive properties that are ideal for airboxes of all shapes and sizes.
BMC filters are made of multi-layered cotton gauze covered with an epoxy-coated alloy mesh for low-humidity oil, ensuring protection from gasoline fumes and oxidation by air humidity.
All BMC air filters are pre-lubricated and can be cleaned and regenerated using the appropriate BMC regeneration kit.