휘발유의 잔량, 사용량을 실시간으로 숫자로 표시.
차종 전용 키트. 설치에 필요한 부품류가 모두 갖추고 있습니다.
노멀 택시 세팅의 연료 소비 데이터 등록 후.
[특징]
● 사용 모드에서는 기름 사용량을 정확히 디지털 표시.
0.01L (10cc) 단위로 표시.
사용량 모드의 리셋은 어느 타이밍에서도 몇번이라도 OK!
트립 미터과의 병용으로 평균·구간, 순간 연비 등의 계측에 매우 편리합니다.
● 잔량 모드에서는 가솔린 잔량을 정확히 디지털 표시.
잔량 10L이상은 0.1L (100cc) 단위로 표시.
잔량 10L미만이 되면 자동에서는 0.01L (10cc) 단위 표시 전환.
*잔량 모드에서 사용량 모드로 전환해도 잔량 모드는 계속됩니다.
● 레이싱 유소년에 딱!
듀얼 모드로 사용량&잔량이 알아!
● 보기 쉬운 LED표시로 밝기 자동 조정 기능 첨부!
백 라이트에는 시정의 좋은 LED를 채용. 또 디머 센서 [자동 조광 기능] 를 탑재하고 있으므로 LED의 밝기를 낮에는 밝은·야간은 어둡게 자동 조정하고 디지털 숫자의 시인성을 더 높입니다.
● 간단 조작
휘발유 만땅 급유 때 리셋 버튼을 누르다만.
● 간단한 장착
● 전력 절약 설계
소비 전력은, 낮 최대 80mA (1w) , 야간 30mA (0.4w) 와 전력 절약 설계입니다.
*종일과 야간의 차이는 디머 센서의 작용으로 표시의 밝기 차이에 의한 것입니다.
[DG시리즈를 설치 장점"노멀의 연료계보다 고 정밀!"]
● 연료 경고등이 장비되는 차량에 설치 장점
연료 경고등이 장비되고 있는 차량은, 연료 잔량이 모르는 상태로 주행할께요.
연료 잔량이 규정치에 이르렀을 때, 연료 경고등이 갑자기 켜지고 버리고, 급히 주유소를 찾게 됩니다.
DG시리즈를 장착함으로써 디지털 숫자로 표시되는 연료 잔량을 정확히 파악하는 여유를 가지고 주유가 가능합니다.
● 연료계가 장비되는 차량에 설치 장점
대부분의 차량의 경우, 채워주유 후에는 수킬로?수십킬로미터 주행하지 않으면 연료계의 표시는 감소하지 않습니다.
이는 일반적으로 연료 잔량을 계측하는 구조로, 플로트의 계측 방법을 쓰고 있기 때문입니다.
*그림 1의 [A] 로 나타난 공간의 연료가 소비되더라도 플로트는 안 내립니다.
그림 1의 [B] 로 나타난 공간의 연료가 소비되어 부표가 낮아지면서 연료계의 표시가 감소합니다.
탱크 모양과 계측 정도의 문제이고, 채워급유 후의 수킬로?수십㎞를 달려도 연료계의 표시에는 거의 변화 없지만 주행 거리 및 연료 소비가 커지면서 연료계의 표시가 떨어지는 속도가 빨라지거나 연료 모두 표시와 남은 연료가 일치하지 않을 수 있습니다.
그러나, DG시리즈는 만땅 때부터 실시간으로 정확한 연료 소비 상황을 디지털 숫자에서 잔량 표시합니다.
[활용 사례]
● 구간 연비의 계측이 가능합니다!
차량의 연비를 계측하는 방법으로 일반적으로 [만땅 법] 가 이용됩니다.
*만땅 법은 휘발유를 채워, 트립 미터를 리셋, 주행 (휘발유를 소비) , 다시 기름을 가득 채워서 주행 거리÷급유량에서 요구하는 연비 계산 방법입니다.
이 방법으로 계측된 연비는, 평균 연비와 하여, 시가지, 일반 도로, 고갯길, 고속 도로 등 여러 주행 상황의 평균적인 연비로 취급됩니다.
이하의 차량의 경우 평균 연비는 20km/L이 됩니다.
이 경우, A:시가지, B:고속 도로, C:일반 도로 각각의 정확한 연비를 계측할 수 없습니다.
본 제품은, 트립 미터과의 병용으로 구간 연비를 계측할 수 있습니다.
A:시가지 30km주행에서 소비된 휘발유가 2L의 경우, 구간 연비는 15km/L
B:고속 도로 100km주행에서 소비된 휘발유가 4L의 경우, 구간 연비는 25km/L
C:일반 길 70km주행에서 소비된 휘발유가 4L의 경우, 구간 연비는 17.5km/L
이렇게 주행 상황에 의한 섬세한 구간 연비를 알 수 있습니다.
또, 거꾸로 0.1L소비하는 동안에 달린 거리를 10배 하면 1L당 주행 거리를 알 수 있습니다.
Displays the amount of gasoline remaining and used in real time with numbers.
A kit for specific models.All the parts you need for installation are ALL in ONE.
The fuel consumption data of the stock carburetor setting has been registered.
[Features]
●In the usage mode, the amount of gasoline used is accurately displayed digitally!
Displayed in units of 0.01L (10cc).
You can reset the usage mode at any time and as many times as you want!
When used with a trip meter, it is very useful for measuring average, sectional and instantaneous fuel consumption.
●Accurate digital display of the remaining gasoline level in the remaining level mode!
Remaining volume of 10L or more is indicated in units of 0.1L (100cc).
When the remaining amount is less than 10L, the display automatically shows the amount by 0.01L (10cc).
*The remaining amount mode is continued even after switching from the remaining amount mode to the used amount mode.
●It's perfect for racing use!
Dual mode allows you to see how much you've used & how much is left!
●Easy-to-read LED display with automatic brightness adjustment function.
The backlight is LED for high visibility.In addition, it is equipped with a dimmer sensor (automatic dimming function), which automatically adjusts the brightness of the LED to brighter in the daytime and darker at night, further improving the visibility of the digital numerals.
●Easy operation
Simply press the reset button when refueling.
●Easy installation
●Power-saving design
The power consumption is 80mA (1W) at maximum during the daytime and 30mA (0.4wW) at night.
*The difference between daytime and nighttime is due to the difference in brightness of the display caused by the dimmer sensor.
[Advantages of installing the DG Series More accurate than a stock fuel gauge!]
●Advantages of installing on vehicles equipped with a fuel warning lamp
Vehicles equipped with a fuel warning light are running without knowing the amount of fuel remaining.
When the fuel level reaches the specified value, the fuel warning light suddenly comes on and you have to rush to find a gas station.
By installing the DG Series, you will be able to accurately grasp the remaining fuel level displayed in digital numbers and refuel in plenty of time.
●Advantages of installing a fuel gauge on a vehicle equipped with a fuel gauge
In most vehicles, the fuel gauge will not show a decrease until the vehicle has been ridden several to several dozen kilometers after refueling.
This is because the float measurement method is generally used to measure the amount of fuel remaining.
*The float does not go down even if fuel is consumed in the space indicated by [a] in Figure 1.
The fuel in the space indicated by [b] in Fig.1 is consumed and the float is lowered, resulting in a decrease in the fuel gauge display.
Due to the shape of the tank and the accuracy of the measurement, there is almost no change in the fuel gauge display even after driving several kilometers or tens of kilometers after filling up the tank, but as the distance traveled and fuel consumption increases, the fuel gauge display may drop faster, or the fuel gauge display may not match the remaining fuel.
However, the DG series displays the exact fuel consumption status in real time with digital figures from the time the tank is full.
[Examples on use]
●You can measure the fuel consumption of a section!
The [fill-up method] is generally used to measure the fuel consumption of a vehicle.
*Fill-up method is a method of calculating fuel consumption by filling up the tank, resetting the trip meter, riding (consuming gasoline), filling up the tank again, and then dividing the distance traveled by the amount of gasoline.
The fuel consumption measured by this method is called average fuel consumption, and is treated as the average fuel consumption in various driving situations such as city streets, ordinary roads, mountain passes, and highways.
The average fuel consumption for the following vehicles is 20km/L.
In this case, A: City, B: Highway, C: It can't measure the exact fuel consumption of each road.
This product can be used in combination with a trip meter to measure the sectional fuel consumption.
A: If the gasoline consumed is 2 liters when riding for 30km in the city, the sectional fuel consumption is 15km/L
B: If the gasoline consumed on a 100-km expressway is 4 liters, the sectional fuel consumption is 25 km/L
C: If the gasoline consumed during a 70-km drive on an ordinary road is 4 liters, the sectional fuel consumption is 17.5 km/L
As you can see, you can get detailed fuel consumption information depending on the driving conditions.
Conversely, the distance traveled while consuming 0.1L can be multiplied by 10 to obtain the distance traveled per 1L.