노멀 오른쪽 케이스 커버 가공용
콘덴서 내 오일 용량:150cc (5단 코어) /75cc (3단 코어)
윤활유 냉각기:5단 코어 콘덴서
볼트 온 장착 가능
차종 전용 스테이 부속
*오른쪽 케이스 커버)가공
*보아 업 키트 등을 장착하고 있는 경우에, ULTRA클러치 커버를 장착하지 않은 경우에는 반드시 오일 필터 키트 (Vol.00-3) 라고 병용하세요.
*윤활유 냉각기를 장착하기 때문에 대용량 오일 펌프 (슈퍼 오일 펌프 키트:331-1413000) 병행을 추천 합니다.
*탱크나 클러치 등 그 부근의 액세서리 파츠 등을 동시에 장착하고 있는 경우는 설치 스테이의 변경 또는 가공이 필요한 경우가 있습니다.
*콘덴서는 반드시 설치 설명서대로 장착하세요. 유니온 니플 측을 하향에 장착하면, 유압이 떨어지는 실린더 헤드의 윤활 부족에 연결됩니다.
*오른쪽 노멀 크랭크 케이스 커버용은 혈개 탭 가공이 필요합니다.
*오일 라인의 추출은 오른쪽 크랭크 케이스 커버에요.
*보아 업 키트 등 장착하고 있는 경우에는 반드시 오일 필터 킷과 병용하세요.
*대용량 오일 펌프와의 병용을 추천 합니다.
For stock right side case cover processing
Oil capacity in condenser: 150cc (5-stage core) / 75cc (3-stage core)
Oil cooler: 5-stage core capacitor
Bolt-on installation is available
Bracket for exclusive use of model included
*Right side case cover requires modification.
*If you have installed a big bore kit, etc. and have not installed the ULTRA clutch cover, be sure to use it together with the oil filter kit (Vol. 00-3).
*Since an oil cooler is installed, a large capacity oil pump (Super Oil Pump Kit: 331-1413000) is recommended.
*The installation bracket may need to be changed or modified if the tank, clutch or other accessory parts are installed at the same time.
*Make sure to install the condenser according to the installation instructions.If the union nipple side is installed face down, the oil pressure will drop and the cylinder head will not be lubricated enough.
*The right side stock crankcase cover requires a tapped hole.
*Oil line access is on the right side crankcase cover.
*If you have installed a big bore kit, be sure to use it with the oil filter kit.
*It is recommended to use with a large capacity oil pump.