SUPER SPORT939용 공동 다운 훅 판.
차량 수송 때나 짐 훅으로.
탠덤 스텝을 뗀 후의 2개의 볼트 구멍을 이용, 쉽게 뗄 수 있습니다.
외모도 물건 자리 사양으로 도우카티 같은 스포티한 외관을 살릴 수 있습니다.
판 후(판두께)10mm의 A201듀랄루민 뽑다
훅 홀 위치를 볼트 구멍 근처에 가지고 오는 것으로 강도를 가지고 있으므로, 타이다 움베르토 사용시에 안 돌게, 제대로 차체를 고정시킵니다.
벨트가 늘 스치는 부분에는 가공 시간이 걸린다 "R후리" 라는 가공을 쓰고 있습니다.
접지 면의 커브가 매끄러운 것으로 벨트를 다치지 않습니다.
Tie down hook plate for SUPERSPORT 939.
For transporting vehicles or as a load hook.
After removing the pillion step, use the two bolt holes for easy removal.
The monoposto look also allows you to take advantage of Ducati's sporty appearance.
Machined from A201 duralumin with a thickness of 10 mm.
The hook holes are located near the bolt holes to make the belt stronger, so it is less likely to bend when using the tie-down belt and can be firmly fixed to the vehicle body.
The part where the belt always rubs is processed by "R chamfering", which takes time to process.
The smooth curve of the contact surface does not damage the belt.