핸들 바 직경, 22. 2mm (7 / 8) 및 클램프, 휴대용 기타 등. 설치를위한 보조 브래킷입니다..
SR400etc. , 대부분의 국내 차량은 22 개입니다.. 2mm 핸들 바를 사용하고 있습니다..
파이프 핸들 바를 비스듬히 바라 보았던 직선 부는 완벽한 원이 아니며 휴대용 Holderetc입니다...
클램핑을 할 수 없다면 더 부착하기를 원하지만 부착한다면.....
"사용하지 않을 때는 즉시 제거하고 싶습니다. 사용 중에 즉시 부착하고 싶습니다.. "나는 오랫동안 고통을 겪고 있었고, 설치를 시도했지만, 마침내 멋진 불편 함이없는 브래킷을 얻었다..
보조 브래킷 자체는 사용하지 않을 때 차체에 붙어 있어도 불편 함이없이 자연스럽게 혼합됩니다..
클램핑 할 수있는 핸들 바 직경은 22입니다. 2mm, 2 가지 멀티 바가 가능합니다..
고객의 사용 상황에 따라 선택하십시오..
■ 멀티 바 측면의 지름
우리는 다음 두 가지 유형을 준비했다..
· 지름 22. 2mm 알루미늄 사양. (7 / 8 일본 자동차 대 핸들 바)
· RubberSpec 직경 25 mm. (Daytona의 빠른 모바일 홀더에 이상적)
This is an auxiliary bracket for attaching an mobile phone etc. by clamping on the handlebar diameter 22.2mm (7/8).
Most of vehicles produced in Japan such as SR400 use 22.2mm handlebar.
The straight part of the handlebar that rises diagonally is not a perfect circle.
There are many cases where clumping can not be done, and if it is installed,......
"I want to be able to remove it when I'm not using it, and put it back on when I am.BORE ACE has been struggling with this for a long time, and through trial and error they have finally come up with a cool auxiliary bracket that doesn't look out of place when installed.
The auxiliary bracket itself remains attached to the vehicle body when not in use, but it blends in naturally without any sense of discomfort.
The diameter of the clamping handlebar is 22.2mm, and there are two types of multi-bars available.
Please select according to your usage situation.
■Diameter of the multibar side
The following two types are available.
・22.2mm diameter aluminum specification (7/8 Japanese vehicles, most handlebars)
・25mm diameter rubber specification (suitable for Daytona quick mobile phone holder)