로드 코멧

[Material]
Windshield: Polycarbonate
Cowl Body: FRP
Back: Surface Matte Finish

[Size]
Overall Height: 470mm
Overall Width: 385mm
Depth: 280mm
[Weight]
・1020g (Weight varies depending on bike model)

[Specifications]
・Compliant with bike inspection

This bikini cowl has a stock design with a slightly rounded shape.
High rectification effect and fearless styling can be obtained. Bolt-on installation to the stock light.
The light is securely fixed in place with the rubber mounts on both sides of the light and the lower rigid mount.
Cowl body is made of FRP and comes stock with a polycarbonate windshield.
The windshield is available in clear or smoked.


Road Comet
The Road Comet is a stock design sporty mini cowl that boasts a wide range of products and high quality.

The slightly rounded shape of the bikini cowl can be installed on any type of bike without feeling uncomfortable, and enhances the original styling appeal of the bike.
This cowl also reduces wind pressure from the shoulders to the torso for comfortable high-speed riding.

The cowl body is made of multi-layered FRP for durability, with a surface matte finish on the underside.

This model is compatible with genuine Japanese domestic color paint using acrylic urethane paint.
The windshield is available in clear or smoke, and uses durable stainless steel screws, polycarbonate washers and locknuts to attach to the cowl body.


■Bolt-On Installation with Bike Model Specific Design
Cut lines and mounting brackets are set for each bike model, allowing for bolt-on installation.
No special tools are required for installation.
This product is also compatible with bike inspections.


■Secure fixation with 3-point mounting system
The 3-point mounting system with rubber mounts on the left and right sides and rigid mounts on the lower part of the bike suppresses unpleasant vibrations and allows you to enjoy stable driving even at high speeds.

All stock colors are clear coated, and the backside is also painted in the same color.


■Installation Procedure
1
Please check the contents before you start to install the parts.
Cowl
Windshield
Instruction manual, body mounting bracket set, windshield screw set (blue)

2
Please prepare the necessary tools for installation:
Combination wrench or spanner (size 14mm, 13mm, 12mm, 10mm, 8mm)
Hexagonal wrench (size 4mm, 3mm)
Phillips head screwdriver
Blanket (to protect the bike body)
Scissors or nippers

3
Install the mounting rubber to the cowl.
Once the collar inside is removed, insert the collar after the mounting rubber is installed.
The mounting rubber is included in the bike body mounting bracket set.

4
Install the windshield to the cowl.
Terminally assemble the windshield screws into all the holes and tighten them evenly.
Windshield screws are included in the windshield screw set (blue).

5
The locknut is designed to prevent loosening, so it is sufficient to check by hand and tighten enough to prevent rattling.
Be careful not to over-tighten, as this may cause the windshield to deform or crack.

6
Remove the screw that holds the light rim in place.

7
Pull out the coupler and remove the light unit.

8
Remove the bolt securing the headlight and replace it with the supplied side mount bolt.
The side mount bolts are included in the bike body mounting bracket set.

9
To prevent misalignment of the optical axis, perform the work one side at a time.

10
Insert the coupler and install the headlight unit in the original location.

11
Tighten the screws on both sides.

12
Temporarily fix the attached bracket.
Loosely assemble the brackets so that the cowl can be aligned later.

13
Cover the cowl.
Align the holes on the left and right side of the light with the holes on the left and right side of the cowl.
Align the brackets so that they are inside the holes on the bottom of the cowl.

14
Install the bolts on both sides to secure the cowl.
The left and right bolts are included in the body mounting bracket set.

15
Align the holes on the bottom of the cowl with the brackets, and temporarily fix with the included bolts and nuts.

16
Adjust the clearance between the light rim and the cowl around the light to set the position.

17
Fasten the bolts on the body side of the bracket.

18
Fasten the bolts on the cowl side.

19
Installation is complete.
Turn the handlebars left and right to make sure there is no interference.