【살아남은 일본 표준 Naked CB 400 SF】
WorldWalk는 다양한 모델의 후방 운반기를 판매합니다.
얇은 도시 제작과 얇은 둥근 막대를 결합한 단순한 디자인에 뒤지지 않는 후방 운반기의 디자인 컨셉은 많은 고객들에 의해 받아 들여지고 현재 판매되지 않고있는 후방 운반기의 개발 요청은 우편 또는 전화로 수집됩니다. 많은.
최근 몇 년 동안의 개발 수요는 2014 년 이후의 CB 400 SF 용 후방 캐리어입니다.
2014 년 모델 이후의 CB 400 SF는 프레임, 엔진, 외장 등의 대형은 아니지만 텐덤 수량으로 승객이 파악한 잡동사니 바 : 쌍 (왼쪽 및 오른쪽) 정수에서 수량으로 : 쌍 (왼쪽 및 오른쪽) 분리 표현식으로 변경되었습니다.
WorldWalk는 수량입니다. : 쌍 (왼쪽 및 오른쪽) 일체형 Grab Bar를 채택한 CB 400 SF 용 Rear Carrier를 판매하였으나 분리형으로되어 설치가 불가능 해졌습니다.
그러나 CB 400 SF는 배기 가스 규제 문제로 절판 될 것이라는 소문이 있었으며 개발을 시작할 수 없었습니다.
그러나, 2017 년 10 월 19 일.
Honda는 10 월 20 일부터 규정에 따라 CB 400SF를 판매 할 것이라고 갑자기 발표했습니다.
나는 계속 판매하기로 결정했다.
많은 고객의 요청에 응답하고 싶다면 개발을 시작하십시오.
늦어졌지만 마침내 대량 생산이 완료되고 발표되었습니다.
【비 호환성이없는 심플한 디자인】
후면 캐리어는 기능 부품입니다.
따라서 사용자를 너무 돋보이게 만들고 싶지 않은 사용자가 많습니다.
후방 운반기 CB 400 SF는 기본적으로 얇은 둥근 막대로 만들어져 눈에 띄지는 않지만 기능을 더 떨어 뜨리지 않는 한도에서 작게 완성됩니다.
Tandem에서 사용되는 잡아 당김 막대를 제거하지 않고도 착용 할 수 있도록 OEMImage를 종료했습니다.
【높이를 낮추고 승하차하기 쉽다.】
후방 캐리어를 높은 위치에두면 오토바이를 타고 내려 오는 동안 다리를 밟을 수 있습니다.
반대로, 매우 낮은 위치에 놓으면 후면 상자 등을 설치할 때 설치의 볼트 및 브래킷이 방해가 될 수 있습니다.
뒷 카리는 CB 400 SF 뒤에 올려 져 있으므로 뒤쪽 캐리어를 설치하면 뒤쪽으로 갈수록 좁은 공간이 생깁니다.
그래서 시트의 개폐로 방해가되지 않는 Limit의 거리 앞쪽에 Rear box를 설치했을 때 Clearance의 넓은 부분을 사용할 수 있도록 설계했습니다. (테일 카울 뒤에서 여백을두고 두 곳을 착용 할 수도 있습니다)
뒤쪽 캐리어의 장착 위치를 더 낮추고 뒤쪽을 테일 카울과 비슷하게 뒤틀린 디자인을 연구했지만, 그렇게 할 때 하중을 가하는 공간이 줄어들고 후면 상자의베이스 등이 어려워졌습니다. 그래서 나는 퇴장했다.
디자인과 기능성을 제한적으로 조정 한 것이 리어 캐리어입니다.
후면 판 장착을 전제로베이스를 고정 할 때 4 곳을 단단히 고정 할 수 있도록 상판을 설계하였습니다.
최대 적재량은 5kg입니다.
대형 후방 상자도 설치할 수 있습니다.
World Walk Rear 상자에 48L의 가장 큰 LargeSize를 설치할 수 있습니다.
[Surviving Japanese Standard Naked CB400SF]
World Walk offers a wide range of rear racks for various models.
The simple and unobtrusive design concept of the rear rack, made of thin round bars and manufactured in the downtown area, has been accepted by many customers and World Walk often receives e-mails and phone calls requesting the development of rear carriers for models that are not currently available.
One of the most popular development requests for the past few years has been a rear carrier for the 2014 CB400SF and later.
From 2014 CB400SF, the frame, engine and exterior are not changed but the grab bar for passenger to hold is changed from one piece to separated.
World Walk used to sell the rear rack for CB400SF which has left and right integrated grab bar, but it is no longer available due to the new separate type.
But on October 19, 2017.
World Walk decided to continue to sell it.
Then, World Walk started development to answer the needs of many customers.
It's been a while, but we've finally completed the mass production of this product and it's ready to be unveiled.
[Simple design with no sense of discomfort]
The rear rack is a functional part.
Therefore, there are many users who do not want to stand out too much.
The rear carrier of CB400SF is basically made of thin round bars, so it is less conspicuous, but it was produced as small as possible without compromising its functionality.
This product can also be installed without removing pillion grab bar, so it won't ruin the stock image.
[Lowering the height to the very limit to make it easier to get in and out]
If the rear rack is mounted in a high position, you may hit your foot while getting on and off the bike.
However, if you install it too low, the bolts and brackets may get in the way when you install a rear box.
Since the tail cowl of CB400SF is raised backward, the clearance becomes narrower at the rear when the rear carrier is installed.
The top panel is moved forward just far enough so that it does not interfere with the opening and closing of the seat, and the rear box can be installed with a wide clearance.(This product can be mounted on two places behind the tail cowl with room to spare)
World Walk considered lowering the position of the rear rack so that the rear side bends back like the tail cowl, but World Walk decided not to do so because it would reduce the space for loading and it would be difficult to install the base of the rear box.
This is a rear rack with design and functionality adjusted to the very limit.
The top panel is designed so that it can be firmly fixed in four places when the base is fixed on the premise that the rear box is installed.
The maximum load capacity is 5kg.
A large rear box can also be installed.
The largest size of the World Walk rear box, 48L, can also be installed.